Source:Bb:Wlnn:Fblock:Tmode#

SCPI Commands

[SOURce<HW>]:BB:WLNN:FBLock<CH>:TMODe

Direct SCPI Members

WlannFbTxModeEnum Get ( )#
WlannFbTxModeEnum Get ( FrameBlockRepCap frameBlock )
void Set ( WlannFbTxModeEnum tmode )#
void Set ( WlannFbTxModeEnum tmode, FrameBlockRepCap frameBlock )
// SCPI: [SOURce<HW>]:BB:WLNN:FBLock<CH>:TMODe
// Get:
WlannFbTxModeEnum value = driver.Source.Bb.Wlnn.Fblock.Tmode.Get();
WlannFbTxModeEnum value = driver.Source.Bb.Wlnn.Fblock.Tmode.Get(FrameBlockRepCap.Default);
// Set:
driver.Source.Bb.Wlnn.Fblock.Tmode.Set(WlannFbTxModeEnum.CCK, FrameBlockRepCap.Default);
driver.Source.Bb.Wlnn.Fblock.Tmode.Set(WlannFbTxModeEnum.CCK);

Sets the transmission (TX) mode. The available TX modes depend on the IEEE 802.11 standard and the transmission bandwidth. For details, see the table Table “WLAN standard, frame types and transmission modes” and the following tables.

tmode L10 | L20 | LDUP | LUP | LLOW | CCK | PBCC | HT20 | HT40 | HTDup | HTUP | HTLow | V20 | V40 | V80 | V8080 | V160 | HE20 | HE40 | HE80 | HE8080 | HE160 | EHT20 | EHT40 | EHT80 | EHT160 | EHT320 | UHR | S1G

  • L20 | LDUP | LUP | LLOW: TX modes for the standards IEEE 802.11a/g.

  • CCK | PBCC: TX modes for the standards IEEE 802.11b/g.

  • L10 | L20: TX modes for the standards IEEE 802.11p/j.

  • HT20 | HT40 | HTDup | HTUP | HTLow: TX modes for the standards IEEE 802.11n.

  • V20 | V40 | V80 | V8080 | V160: TX modes for the standards IEEE 802.11ac.

  • HE20 | HE40 | HE80 | HE8080 | HE160: TX modes for the standards IEEE 802.11ax.

  • EHT20 | EHT40 | EHT80 | EHT160 | EHT320: TX modes for the standards IEEE 802.11be.

  • UHR: TX modes for the standards IEEE 802.11bn.

  • S1G: TX modes for the standards IEEE 802.11ah.

frameBlock Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.