Source:Bb:Wlnn:Clipping#
SCPI Commands
- [SOURce<HW>]:BB:WLNN:CLIPping:LEVel
- [SOURce<HW>]:BB:WLNN:CLIPping:MODE
- [SOURce<HW>]:BB:WLNN:CLIPping:SPPState
- [SOURce<HW>]:BB:WLNN:CLIPping:STATe
Direct SCPI Members
- int Level#
// SCPI: [SOURce<HW>]:BB:WLNN:CLIPping:LEVel int value = driver.Source.Bb.Wlnn.Clipping.Level; driver.Source.Bb.Wlnn.Clipping.Level = 1;Sets the limit for level clipping. This value indicates at what point the signal is clipped. It is specified as a percentage, relative to the highest level. 100% indicates that clipping does not take place. Level clipping is activated if method RsSmw.Source.Bb.Wlnn.Clipping.State is set to ON.
level: integer
- ClipModeEnum Mode#
// SCPI: [SOURce<HW>]:BB:WLNN:CLIPping:MODE ClipModeEnum value = driver.Source.Bb.Wlnn.Clipping.Mode; driver.Source.Bb.Wlnn.Clipping.Mode = ClipModeEnum.SCALar;Sets the method for level clipping.
mode: VECTor | SCALar
VECTor: The reference level is the amplitude i+jq.
SCALar: The reference level is the absolute maximum of the I and Q values.
- bool SppsState#
// SCPI: [SOURce<HW>]:BB:WLNN:CLIPping:SPPState bool value = driver.Source.Bb.Wlnn.Clipping.SppsState; driver.Source.Bb.Wlnn.Clipping.SppsState = false;Applies vector clipping to fields L-SIG, RL-SIG, U-SIG and EHT-SIG.
state: 1 | ON | 0| OFF
- bool State#
// SCPI: [SOURce<HW>]:BB:WLNN:CLIPping:STATe bool value = driver.Source.Bb.Wlnn.Clipping.State; driver.Source.Bb.Wlnn.Clipping.State = false;Activates level clipping (Clipping) . The value is defined with method RsSmw.Source.Bb.Wlnn.Clipping.Level, the mode of calculation with method RsSmw.Source.Bb.Wlnn.Clipping.Mode.
state: 1 | ON | 0| OFF