Source:Bb:Wlay:Pconfig:Hda#
SCPI Commands
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:BMCS
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:BW
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:CCONfig
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:PCHannel
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:RTPT
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:TRNM
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:TRNN
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:TRNP
- [SOURce<HW>]:BB:WLAY:PCONfig:HDA:TSL
Cloning the Group
// Create a clone of the original group, that exists independently
var hda2 = driver.Source.Bb.Wlay.Pconfig.Hda.Clone();
Direct SCPI Members
- int Bmcs#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:BMCS int value = driver.Source.Bb.Wlay.Pconfig.Hda.Bmcs; driver.Source.Bb.Wlay.Pconfig.Hda.Bmcs = 1;Selects the modulation and coding scheme (MCS) for all spatial streams. The current firmware supports MSC for EDMG SC mode only, see Table “MCS for IEEE 802.11ay EDMG SC mode”, for example.
baseMcs: integer
- WlanayBwEnum Bw#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:BW WlanayBwEnum value = driver.Source.Bb.Wlay.Pconfig.Hda.Bw; driver.Source.Bb.Wlay.Pconfig.Hda.Bw = WlanayBwEnum.BW216;Sets the bandwidth of the EDMG single carrier signal that is a multiple of 2.16 GHz.
bw: BW216 | BW432
BW216: 2.16 GHz bandwidth
BW432: Requires R&S SMW-K555. 4.32 GHz bandwidth
- int Cconfig#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:CCONfig int value = driver.Source.Bb.Wlay.Pconfig.Hda.Cconfig; driver.Source.Bb.Wlay.Pconfig.Hda.Cconfig = 1;Sets the channel configuration that is the configuration 2.16 GHz and 4.32 GHz channels.
channelConfig: integer
- double Pchannel#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:PCHannel double value = driver.Source.Bb.Wlay.Pconfig.Hda.Pchannel;Queries the primary channel number as set via the channel configuration, see Table “Channels of an EDMG STA”.
primaryCha: float
- int Rtpt#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:RTPT int value = driver.Source.Bb.Wlay.Pconfig.Hda.Rtpt; driver.Source.Bb.Wlay.Pconfig.Hda.Rtpt = 1;Sets the number of receive (RX) TRN units per transmit (TX) TRN unit.
rxTrnTxTrn: integer
- int TrnM#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:TRNM int value = driver.Source.Bb.Wlay.Pconfig.Hda.TrnM; driver.Source.Bb.Wlay.Pconfig.Hda.TrnM = 1;Sets the bits in the 4-bit EDMG TRN-Unit M field.
trnM: integer
- int TrnN#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:TRNN int value = driver.Source.Bb.Wlay.Pconfig.Hda.TrnN; driver.Source.Bb.Wlay.Pconfig.Hda.TrnN = 1;Sets the bits in the 2-bit EDMG TRN-Unit N field.
trnN: integer
- int TrnP#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:TRNP int value = driver.Source.Bb.Wlay.Pconfig.Hda.TrnP; driver.Source.Bb.Wlay.Pconfig.Hda.TrnP = 1;Sets the bits in the 2-bit EDMG TRN-Unit P field.
trnP: integer
- SequenceLengthEnum Tsl#
// SCPI: [SOURce<HW>]:BB:WLAY:PCONfig:HDA:TSL SequenceLengthEnum value = driver.Source.Bb.Wlay.Pconfig.Hda.Tsl; driver.Source.Bb.Wlay.Pconfig.Hda.Tsl = SequenceLengthEnum.LONG;Sets training sequence length as set with the 2-bit subfield “Sequence Length” of the TRN field.
trnSeqLen: NORMAL | LONG | SHORT
NORMAL: Normal sequence length of 128 × NCB with subfield value 0.
LONG: Long sequence length of 256 × NCB with subfield value 1.
SHORT: Short sequence length of 64 × NCB with subfield value 2.
Subgroups