Source:Bb:Tetra:Pramping#

SCPI Commands

[SOURce<HW>]:BB:TETRa:PRAMping:FOFFset
[SOURce<HW>]:BB:TETRa:PRAMping:RFUNction
[SOURce<HW>]:BB:TETRa:PRAMping:ROFFset
[SOURce<HW>]:BB:TETRa:PRAMping:RTIMe

Direct SCPI Members

int Foffset#
// SCPI: [SOURce<HW>]:BB:TETRa:PRAMping:FOFFset
int value = driver.Source.Bb.Tetra.Pramping.Foffset;
driver.Source.Bb.Tetra.Pramping.Foffset = 1;

Sets the offset in the falling edge of the envelope at the end of a frame. A positive value gives rise to a delay and a negative value causes an advance. The setting is expressed in symbols.

foffset: integer


RampFuncEnum Rfunction#
// SCPI: [SOURce<HW>]:BB:TETRa:PRAMping:RFUNction
RampFuncEnum value = driver.Source.Bb.Tetra.Pramping.Rfunction;
driver.Source.Bb.Tetra.Pramping.Rfunction = RampFuncEnum.COSine;

Enters the form of the transmitted power during the switching operation, i.e. the shape of the rising and falling edges of the envelope.

rfunction: LINear | COSine

  • LINear: The transmitted power rises and falls linear fashion.

  • COSine: The transmitted power rises and falls with a cosine-shaped edge. This gives rise to a more favorable spectrum than the Linear setting.


int Roffset#
// SCPI: [SOURce<HW>]:BB:TETRa:PRAMping:ROFFset
int value = driver.Source.Bb.Tetra.Pramping.Roffset;
driver.Source.Bb.Tetra.Pramping.Roffset = 1;

Sets the offset in the rising edge of the envelope at the start of a frame. A positive value gives rise to a delay and a negative value causes an advance. The setting is expressed in symbols.

roffset: integer


int Rtime#
// SCPI: [SOURce<HW>]:BB:TETRa:PRAMping:RTIMe
int value = driver.Source.Bb.Tetra.Pramping.Rtime;
driver.Source.Bb.Tetra.Pramping.Rtime = 1;

Enters the power ramping rise time and fall time for a frame. The setting is expressed in symbols. The transmitted power must not be switched abruptly at the start and end of a frame, because the switching operation would otherwise generate excessively strong non-harmonics; the switching operation is therefore stretched over several symbol clocks.

rtime: integer