Source:Bb:Tetra:Bbncht#

SCPI Commands

[SOURce<HW>]:BB:TETRa:BBNCht:APARameter
[SOURce<HW>]:BB:TETRa:BBNCht:BCCode
[SOURce<HW>]:BB:TETRa:BBNCht:CBANdwidth
[SOURce<HW>]:BB:TETRa:BBNCht:CRFRequency
[SOURce<HW>]:BB:TETRa:BBNCht:CSLevel
[SOURce<HW>]:BB:TETRa:BBNCht:DNBBroadcast
[SOURce<HW>]:BB:TETRa:BBNCht:DNBenquiry
[SOURce<HW>]:BB:TETRa:BBNCht:DSPacing
[SOURce<HW>]:BB:TETRa:BBNCht:ECORrection
[SOURce<HW>]:BB:TETRa:BBNCht:FBANd
[SOURce<HW>]:BB:TETRa:BBNCht:FEEXtension
[SOURce<HW>]:BB:TETRa:BBNCht:LBACk
[SOURce<HW>]:BB:TETRa:BBNCht:LENTry
[SOURce<HW>]:BB:TETRa:BBNCht:MCCode
[SOURce<HW>]:BB:TETRa:BBNCht:MCNumber
[SOURce<HW>]:BB:TETRa:BBNCht:MNCode
[SOURce<HW>]:BB:TETRa:BBNCht:MTMCell
[SOURce<HW>]:BB:TETRa:BBNCht:OFFSet
[SOURce<HW>]:BB:TETRa:BBNCht:ROPeration
[SOURce<HW>]:BB:TETRa:BBNCht:SCODe
[SOURce<HW>]:BB:TETRa:BBNCht:SMODe
[SOURce<HW>]:BB:TETRa:BBNCht:TBTYpe
[SOURce<HW>]:BB:TETRa:BBNCht:TRFRames
[SOURce<HW>]:BB:TETRa:BBNCht:TTBType
[SOURce<HW>]:BB:TETRa:BBNCht:TXON
[SOURce<HW>]:BB:TETRa:BBNCht:UPDTx

Direct SCPI Members

TetraAcssParmEnum Aparameter#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:APARameter
TetraAcssParmEnum value = driver.Source.Bb.Tetra.Bbncht.Aparameter;
driver.Source.Bb.Tetra.Bbncht.Aparameter = TetraAcssParmEnum.AP23;

Sets the value of the ACCESS_PARAMETER information field. This parameter is used for subsequent power adjustments for the mobile station. This protocol information field can takes values from -53 dBm to -23 dBm in 2 dB steps.

aparameter: AP53 | AP51 | AP49 | AP47 | AP45 | AP43 | AP41 | AP39 | AP37 | AP35 | AP33 | AP31 | AP29 | AP27 | AP25 | AP23


int BcCode#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:BCCode
int value = driver.Source.Bb.Tetra.Bbncht.BcCode;
driver.Source.Bb.Tetra.Bbncht.BcCode = 1;

Sets the colour code. The base color code is the number of subscriber group in a network. See Table “Building of scrambling code” for information on how the scrambling code is calculated.

bcCode: integer


TetraCrrBndwdthEnum Cbandwidth#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:CBANdwidth
TetraCrrBndwdthEnum value = driver.Source.Bb.Tetra.Bbncht.Cbandwidth;
driver.Source.Bb.Tetra.Bbncht.Cbandwidth = TetraCrrBndwdthEnum.C100;

Selects the carrier bandwidth, i.e. determines the carrier spacing. The default value for all standard test modes is 25kHz; carrier spacing of 50, 100 and 150 kHz is enabled for Test Mode set to User Defined or T4.

cbandwidth: C25 | C50 | C100 | C150


double CrFrequency#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:CRFRequency
double value = driver.Source.Bb.Tetra.Bbncht.CrFrequency;

Displays the resulting RF frequency, calculated from the previous settings. The frequency is calculated from the Frequency Band, Main Carrier Number, Offset, Duplex Spacing and Reverse Operation and transmitted in message channel BNCH/T when Downlink MS V+D Testing is selected. The Coded RF Frequency is calculated as described in Table “Calculation of coded RF frequency”.

crFrequency: float


TetraCelSvLevelEnum CsLevel#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:CSLevel
TetraCelSvLevelEnum value = driver.Source.Bb.Tetra.Bbncht.CsLevel;
driver.Source.Bb.Tetra.Bbncht.CsLevel = TetraCelSvLevelEnum.CLUNknown;

Sets the cell service level information element, i.e. define the level of service a MS may receive in a cell. It may relate to the traffic loading in a cell.

csLevel: CLUNknown | LCLoad | MCLoad | HCLoad

  • CLUNknown: Cell load unknown

  • LCLoad: Low cell load

  • MCLoad: Medium cell load

  • HCLoad: High cell load


bool DnbBroadcast#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:DNBBroadcast
bool value = driver.Source.Bb.Tetra.Bbncht.DnbBroadcast;
driver.Source.Bb.Tetra.Bbncht.DnbBroadcast = false;

Enables/disables support of the D-NWRK-BROADCAST PDU.

dnbBroadcast: 1 | ON | 0| OFF


bool DnbEnquiry#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:DNBenquiry
bool value = driver.Source.Bb.Tetra.Bbncht.DnbEnquiry;
driver.Source.Bb.Tetra.Bbncht.DnbEnquiry = false;

Enables/disables support of the D-NWRK-BROADCAST enquiry.

dnbEnquiry: 1 | ON | 0| OFF


TetraDplxSpcingEnum Dspacing#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:DSPacing
TetraDplxSpcingEnum value = driver.Source.Bb.Tetra.Bbncht.Dspacing;
driver.Source.Bb.Tetra.Bbncht.Dspacing = TetraDplxSpcingEnum.DS0;

(for Uplink direction only) The Duplex Spacing and Reverse Operation parameters in the BNCH/T indicate the required uplink frequency with respect to the indicated downlink frequency. These parameters are defined in ETSI 300 392-2.

dspacing: DS0 | DS1 | DS2 | DS3 | DS4 | DS5 | DS6 | DS7


bool Ecorrection#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:ECORrection
bool value = driver.Source.Bb.Tetra.Bbncht.Ecorrection;
driver.Source.Bb.Tetra.Bbncht.Ecorrection = false;

Enables/disables error correction.

ecorrection: 1 | ON | 0| OFF


TetraFreqBandEnum Fband#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:FBANd
TetraFreqBandEnum value = driver.Source.Bb.Tetra.Bbncht.Fband;
driver.Source.Bb.Tetra.Bbncht.Fband = TetraFreqBandEnum.F100;

Sets the Frequency Band. This setting has an effect on the calculation of the transmission frequency. The Frequency Band Information is inserted only in the TETRA BSCH protocol channel.

fband: F100 | F200 | F300 | F400 | F500 | F600 | F700 | F800 | F900


bool FeExtension#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:FEEXtension
bool value = driver.Source.Bb.Tetra.Bbncht.FeExtension;
driver.Source.Bb.Tetra.Bbncht.FeExtension = false;

Enables/disables the frame 18 extension element, i.e. indicates whether an MS is allowed to receive downlink information on all slots of the frame 18. If extension is allowed, only MSs which are capable of receiving consecutive slots are able to perform this function.

feExtension: 1 | ON | 0| OFF


bool Lback#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:LBACk
bool value = driver.Source.Bb.Tetra.Bbncht.Lback;
driver.Source.Bb.Tetra.Bbncht.Lback = false;

Enables/disables loop back for test purposes. If enabled, the mobile station should set up a loop and return the data when requested by the Tx_burst_type.

lback: 1 | ON | 0| OFF


bool Lentry#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:LENTry
bool value = driver.Source.Bb.Tetra.Bbncht.Lentry;
driver.Source.Bb.Tetra.Bbncht.Lentry = false;

Sets the value of the late entry supported information element, used to indicate to the MS whether or not late entry can be supported by the cell.

lentry: 1 | ON | 0| OFF


int Mccode#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:MCCode
int value = driver.Source.Bb.Tetra.Bbncht.Mccode;
driver.Source.Bb.Tetra.Bbncht.Mccode = 1;

Sets the Mobile Country Code. The MCC is the number of the country in which the unit is operated. See Table “Building of scrambling code” for information on how the scrambling code is calculated.

mccode: integer


int McNumber#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:MCNumber
int value = driver.Source.Bb.Tetra.Bbncht.McNumber;
driver.Source.Bb.Tetra.Bbncht.McNumber = 1;

The Main Carrier Number divides the TETRA band into carriers with a spacing as set with the parameter Carrier Bandwidth. The range is 0 to 4095 (12 bits) . The Main Carrier Frequency is calculated as follow: Main Carrier Frequency, kHz = Main Carrier Number * Carrier Bandwidth

mcNumber: integer


int Mncode#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:MNCode
int value = driver.Source.Bb.Tetra.Bbncht.Mncode;
driver.Source.Bb.Tetra.Bbncht.Mncode = 1;

Sets the Mobile Network Code (MNC) . The MNC is the number of the TETRA network operator. See Table “Building of scrambling code” for information on how the scrambling code is calculated.

mncode: integer


TetraTxPwrEnum MtmCell#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:MTMCell
TetraTxPwrEnum value = driver.Source.Bb.Tetra.Bbncht.MtmCell;
driver.Source.Bb.Tetra.Bbncht.MtmCell = TetraTxPwrEnum.M15;

Sets the protocol information on the maximum transmission power for the mobile station. Allowed are values from 15 dBm to 45 dBm in 5 dB steps. The MS_TXPWR_MAX_CELL paramer is used for cell selection and reselection, and for power adjustments.

mtmCell: M15 | M20 | M25 | M30 | M35 | M40 | M45


TetraOffsetEnum Offset#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:OFFSet
TetraOffsetEnum value = driver.Source.Bb.Tetra.Bbncht.Offset;
driver.Source.Bb.Tetra.Bbncht.Offset = TetraOffsetEnum.M625;

Set the Offset to shifft the center frequency in the channel spacing. The allowed offsets are +6.25, 0,–6.25 and +12.50 kHz.

offset: ZERO | P625 | M625 | P125


bool Roperation#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:ROPeration
bool value = driver.Source.Bb.Tetra.Bbncht.Roperation;
driver.Source.Bb.Tetra.Bbncht.Roperation = false;

(for Uplink direction only) Enables/disables reverse operation. Reverse operation is used to fix the uplink frequency relative to the downlink frequency. In normal operation, the uplink frequency is lower than the downlink frequency and in reverse operation, the uplink frequency is higher than the downlink frequency.

roperation: 1 | ON | 0| OFF


TetraSysCodeEnum Scode#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:SCODe
TetraSysCodeEnum value = driver.Source.Bb.Tetra.Bbncht.Scode;
driver.Source.Bb.Tetra.Bbncht.Scode = TetraSysCodeEnum.S0;

Indicate whether the system is a TETRA V+D system or whether this is a Direct Mode transmission.

scode: S0 | S1 | S2 | S3 | S4 | S5 | S6 | S7


TetraShrngModeEnum Smode#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:SMODe
TetraShrngModeEnum value = driver.Source.Bb.Tetra.Bbncht.Smode;
driver.Source.Bb.Tetra.Bbncht.Smode = TetraShrngModeEnum.CSHaring;

The sharing mode field indicates whether the BS is using continuous transmission, carrier sharing, MCCH sharing or traffic carrier sharing.

smode: CTRansmission | CSHaring | MSHaring | TCSHaring


TetraTxBurstTypeEnum TbType#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:TBTYpe
TetraTxBurstTypeEnum value = driver.Source.Bb.Tetra.Bbncht.TbType;
driver.Source.Bb.Tetra.Bbncht.TbType = TetraTxBurstTypeEnum.CUB;

Sets the parameter Tx_burst_type and determines whether the MS under test transmit either a normal uplink burst or control uplink burst.

tbType: NUB | CUB

  • NUB: The mobile station should transmit using normal uplink burst.

  • CUB: The mobile station should transmit using control uplink burst.


TetraTsRsrvdFrmEnum TrFrames#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:TRFRames
TetraTsRsrvdFrmEnum value = driver.Source.Bb.Tetra.Bbncht.TrFrames;
driver.Source.Bb.Tetra.Bbncht.TrFrames = TetraTsRsrvdFrmEnum.F1;

Determines the number of frames reserved over two multiframes period. The way this field is processed, depends on the selected method RsSmw.Source.Bb.Tetra.Bbncht.Smode. If MCCH sharing is indicated, the TS reserved frames field shall indicate which frames are reserved in this mode of operation. For the other values of sharing mode, the contents of the TS reserved frames field shall be ignored.

trFrames: F1 | F2 | F3 | F4 | F6 | F9 | F12 | F18


TetraBurstTypeEnum TtbType#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:TTBType
TetraBurstTypeEnum value = driver.Source.Bb.Tetra.Bbncht.TtbType;
driver.Source.Bb.Tetra.Bbncht.TtbType = TetraBurstTypeEnum.BSHD;

Sets the value of the special parameter T1_T4_Burst_Type, i.e. determines the logical channel the BS is expecting to receive.

ttbType: T72F | T72S | SFD | BSHD | T24D | RSV1 | RSV2 | T72U | SFU | SSTCh | T24U | SSCH | RSV3 | RSBurst | RSSBurst | TPTD | TPTU | T48D | T48U | TSCD | TSCU | T108 | SPHD | SPHU | SPF | SQHU | SQU | SQD | SQRA


TetraTxOnEnum Txon#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:TXON
TetraTxOnEnum value = driver.Source.Bb.Tetra.Bbncht.Txon;
driver.Source.Bb.Tetra.Bbncht.Txon = TetraTxOnEnum.RON;

Determines the value of the Tx_on parameter, i.e. selects the test mode the MS operates in, Reception ON or Transmission ON. This parameter is neccessary for the generation of test signal T1 or T4 transmitted by the test system.

txon: RON | TON

  • RON: The mobile station is requested to recept.

  • TON: The mobile station is requested to transmit.


bool Updtx#
// SCPI: [SOURce<HW>]:BB:TETRa:BBNCht:UPDTx
bool value = driver.Source.Bb.Tetra.Bbncht.Updtx;
driver.Source.Bb.Tetra.Bbncht.Updtx = false;

The U-plane DTX element indicates whether or not the BS supports discontinuous traffic transmission by the MS.

updtx: 1 | ON | 0| OFF