Source:Bb:Ofdm#

SCPI Commands

[SOURce<HW>]:BB:OFDM:ACPLength
[SOURce<HW>]:BB:OFDM:ACPSymbols
[SOURce<HW>]:BB:OFDM:BWOCcupied
[SOURce<HW>]:BB:OFDM:CPSYmbols
[SOURce<HW>]:BB:OFDM:DCMode
[SOURce<HW>]:BB:OFDM:LGUard
[SOURce<HW>]:BB:OFDM:MODulation
[SOURce<HW>]:BB:OFDM:NALLoc
[SOURce<HW>]:BB:OFDM:NOCCupied
[SOURce<HW>]:BB:OFDM:NSUBcarriers
[SOURce<HW>]:BB:OFDM:OFFSet
[SOURce<HW>]:BB:OFDM:OUTPath
[SOURce<HW>]:BB:OFDM:PRESet
[SOURce<HW>]:BB:OFDM:RGUard
[SOURce<HW>]:BB:OFDM:RSAMples
[SOURce<HW>]:BB:OFDM:SAMPling
[SOURce<HW>]:BB:OFDM:SCSPace
[SOURce<HW>]:BB:OFDM:SEQLength
[SOURce<HW>]:BB:OFDM:STATe
[SOURce<HW>]:BB:OFDM:SUBCarriers
[SOURce<HW>]:BB:OFDM:ZSAMples

Cloning the Group

// Create a clone of the original group, that exists independently
var ofdm2 = driver.Source.Bb.Ofdm.Clone();

Direct SCPI Members

int AcpLength#
// SCPI: [SOURce<HW>]:BB:OFDM:ACPLength
int value = driver.Source.Bb.Ofdm.AcpLength;

For f-OFDM/OFDM, enables additional alternative CP.

cpLength: integer


int AcpSymbols#
// SCPI: [SOURce<HW>]:BB:OFDM:ACPSymbols
int value = driver.Source.Bb.Ofdm.AcpSymbols;

For f-OFDM/OFDM, defines number of symbols on that the cyclic prefix/the alternative cyclic prefix is applied.

cpSymbols: integer


double BwOccupied#
// SCPI: [SOURce<HW>]:BB:OFDM:BWOCcupied
double value = driver.Source.Bb.Ofdm.BwOccupied;

Queries the occupied bandwidth.

occBw: float


int CpSymbols#
// SCPI: [SOURce<HW>]:BB:OFDM:CPSYmbols
int value = driver.Source.Bb.Ofdm.CpSymbols;

For f-OFDM/OFDM, defines number of symbols on that the cyclic prefix/the alternative cyclic prefix is applied.

cpSymbols: integer


C5GdcModeEnum DcMode#
// SCPI: [SOURce<HW>]:BB:OFDM:DCMode
C5GdcModeEnum value = driver.Source.Bb.Ofdm.DcMode;

Sets the DC subcarrier mode.

dcMode: UTIL | PUNC | SKIP

  • UTIL: Uses the DC subcarrier for all allocations.

  • PUNC: Replaces the DC subcarrier by zeroes for all allocations.

  • SKIP: Skips the DC subcarrier in the discrete Fourier transformation (DFT) .


int Lguard#
// SCPI: [SOURce<HW>]:BB:OFDM:LGUard
int value = driver.Source.Bb.Ofdm.Lguard;

Queries the number of left guard subcarriers.

leftGuardSc: integer


C5GmodEnum Modulation#
// SCPI: [SOURce<HW>]:BB:OFDM:MODulation
C5GmodEnum value = driver.Source.Bb.Ofdm.Modulation;

Selects the modulation type.

modType: UFMC | FBMC | GFDM | FOFDm | OFDM

  • UFMC: Universal Filtered Multi-Carrier modulation, see “UFMC”.

  • FBMC: Filter Bank Multi-Carrier modulation, see “FBMC”.

  • GFDM: Generalized Frequency Division Multiplexing, see “GFDM”.

  • FOFDm: Filtered-OFDM modulation, see “f-OFDM”.

  • OFDM: Orthogonal Frequency-Division Multiplexing modulation, see “OFDM”.


int Nalloc#
// SCPI: [SOURce<HW>]:BB:OFDM:NALLoc
int value = driver.Source.Bb.Ofdm.Nalloc;

Sets the number of scheduled allocations.

noOfAlloc: integer


int Noccupied#
// SCPI: [SOURce<HW>]:BB:OFDM:NOCCupied
int value = driver.Source.Bb.Ofdm.Noccupied;

Sets the number of occupied subcarriers.

numOccSc: integer


int Nsubcarriers#
// SCPI: [SOURce<HW>]:BB:OFDM:NSUBcarriers
int value = driver.Source.Bb.Ofdm.Nsubcarriers;

Sets the number of available subcarriers.

noOfSubCarr: integer


int Offset#
// SCPI: [SOURce<HW>]:BB:OFDM:OFFSet
int value = driver.Source.Bb.Ofdm.Offset;

Requires OFDM modulation type: SOURce1:BB:OFDM:MODulation OFDM Sets the symbol offset that is the number of skipped symbols before inserting the zero padding samples. The maximum offset equals the sequence length minus one symbol, see method RsSmw.Source.Bb.Ofdm.SeqLength.

offset: integer


string OutPath#
// SCPI: [SOURce<HW>]:BB:OFDM:OUTPath
string value = driver.Source.Bb.Ofdm.OutPath;

Specifies the output path and output file of the exported OFDM signal generation settings. By default, the output path is /var/user/K114-Export and the output file is Exported_K114_settings_K96.xml. See also Example “Default Exported_K114_settings_K96.xml file”.

k114OutputPath: string


void Preset ( )#
void PresetAndWait ( )#
void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:OFDM:PRESet
driver.Source.Bb.Ofdm.Preset();
driver.Source.Bb.Ofdm.PresetAndWait();
driver.Source.Bb.Ofdm.PresetAndWait(1000);

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:OFDM:STATe.

PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.


int Rguard#
// SCPI: [SOURce<HW>]:BB:OFDM:RGUard
int value = driver.Source.Bb.Ofdm.Rguard;

Queries the number of right guard subcarriers.

rightGuardSc: integer


int Rsamples#
// SCPI: [SOURce<HW>]:BB:OFDM:RSAMples
int value = driver.Source.Bb.Ofdm.Rsamples;

Requires OFDM modulation type: SOURce1:BB:OFDM:MODulation OFDM Sets the repetition of inserted zero samples. This repetition defines the number of symbols between repeating zero samples. The maximum number of repetitions equals the sequence length, see method RsSmw.Source.Bb.Ofdm.SeqLength.

repForSamples: integer


double Sampling#
// SCPI: [SOURce<HW>]:BB:OFDM:SAMPling
double value = driver.Source.Bb.Ofdm.Sampling;

Queries the sampling rate.

sampRate: float


double ScSpace#
// SCPI: [SOURce<HW>]:BB:OFDM:SCSPace
double value = driver.Source.Bb.Ofdm.ScSpace;

Sets the frequency distance between the carrier frequencies of the subcarriers.

subCarSp: float


int SeqLength#
// SCPI: [SOURce<HW>]:BB:OFDM:SEQLength
int value = driver.Source.Bb.Ofdm.SeqLength;

Sets the sequence length of the signal in number of symbols.

seqLen: integer


bool State#
// SCPI: [SOURce<HW>]:BB:OFDM:STATe
bool value = driver.Source.Bb.Ofdm.State;

Activates the standard.

state: 1 | ON | 0| OFF


int Subcarriers#
// SCPI: [SOURce<HW>]:BB:OFDM:SUBCarriers
int value = driver.Source.Bb.Ofdm.Subcarriers;

Queries the number of subcarriers per subband.

subcPerSubband: integer


int Zsamples#
// SCPI: [SOURce<HW>]:BB:OFDM:ZSAMples
int value = driver.Source.Bb.Ofdm.Zsamples;

Requires OFDM modulation type: SOURce1:BB:OFDM:MODulation OFDM Sets the number of samples for zero padding. The instrument inserts these zero samples before the modulation symbols. See also “Padding with zero samples”. The maximum number equals the total number of subcarriers minus one sample, see method RsSmw.Source.Bb.Ofdm.Nsubcarriers.

zeroSamples: integer


Subgroups