RsSmw
RsSmw
  • RsSmw C# API Structure
  • Source
  • Source:Bb
  • Source:Bb:Nr5G
  • Source:Bb:Nr5G:Ubwp
  • Source:Bb:Nr5G:Ubwp:User<UserNullRepCap>
  • Source:Bb:Nr5G:Ubwp:User:Cell<CellNullRepCap>
  • Source:Bb:Nr5G:Ubwp:User:Cell:Uplink
  • Source:Bb:Nr5G:Ubwp:User:Cell:Uplink:Bwp<BwPartNullRepCap>
  • Source:Bb:Nr5G:Ubwp:User:Cell:Uplink:Bwp:Pusch
  • Source:Bb:Nr5G:Ubwp:User:Cell:Uplink:Bwp:Pusch:FhOffsets
  • Source:Bb:Nr5G:Ubwp:User:Cell:Uplink:Bwp:Pusch:FhOffsets:Noffsets

Source:Bb:Nr5G:Ubwp:User:Cell:Uplink:Bwp:Pusch:FhOffsets:Noffsets#

SCPI Commands

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:FHOFfsets:NOFFsets

Direct SCPI Members

int Get ( )#
int Get ( UserNullRepCap userNull, CellNullRepCap cellNull, BwPartNullRepCap bwPartNull )
// SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:FHOFfsets:NOFFsets
int value = driver.Source.Bb.Nr5G.Ubwp.User.Cell.Uplink.Bwp.Pusch.FhOffsets.Noffsets.Get();
int value = driver.Source.Bb.Nr5G.Ubwp.User.Cell.Uplink.Bwp.Pusch.FhOffsets.Noffsets.Get(UserNullRepCap.Default, CellNullRepCap.Default, BwPartNullRepCap.Default);

Defines the number off frequency hopping offsets.

  • If the size of the active BWP is fewer than 50 PRBs, one of two higher layer configured offsets are indicated in the UL grant.

  • If the size of the active BWP is equal to or greater than 50 PRBs, one of four higher layer configured offsets are indicated in the UL grant.

numFreqHopOff: integer

userNull Repeated capability selector

cellNull Repeated capability selector

bwPartNull Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.

PreviousNext

© Copyright © Rohde & Schwarz 2026.