RsSmw
RsSmw
  • RsSmw C# API Structure
  • Source
  • Source:Bb
  • Source:Bb:Nr5G
  • Source:Bb:Nr5G:Ubwp
  • Source:Bb:Nr5G:Ubwp:User<UserNullRepCap>
  • Source:Bb:Nr5G:Ubwp:User:Cell<CellNullRepCap>
  • Source:Bb:Nr5G:Ubwp:User:Cell:Downlink
  • Source:Bb:Nr5G:Ubwp:User:Cell:Downlink:Bwp<BwPartNullRepCap>
  • Source:Bb:Nr5G:Ubwp:User:Cell:Downlink:Bwp:Rmc
  • Source:Bb:Nr5G:Ubwp:User:Cell:Downlink:Bwp:Rmc:Id

Source:Bb:Nr5G:Ubwp:User:Cell:Downlink:Bwp:Rmc:Id#

SCPI Commands

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:RMC:ID

Direct SCPI Members

RmcIdAllEnum Get ( )#
RmcIdAllEnum Get ( UserNullRepCap userNull, CellNullRepCap cellNull, BwPartNullRepCap bwPartNull )
// SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:RMC:ID
RmcIdAllEnum value = driver.Source.Bb.Nr5G.Ubwp.User.Cell.Downlink.Bwp.Rmc.Id.Get();
RmcIdAllEnum value = driver.Source.Bb.Nr5G.Ubwp.User.Cell.Downlink.Bwp.Rmc.Id.Get(UserNullRepCap.Default, CellNullRepCap.Default, BwPartNullRepCap.Default);

This command selects a reference measurement channel. The availability of RMCs depends on the subcarrier spacing of the bandwidth part you are configuring.

rmcId: The logic of the labels is as follows: No prefix = 38.521 FR1 RMCs Prefix FR2 = 38.521 FR2 RMCs F / T = duplexing (FDD or TDD) Q / 6 / 2 = modulation (QPSK, 64QAM or 256 QAM) 15 / 30 / 60 = subcarrier spacing (15, 30 or 60 kHz) For example “T615” corresponds to FR1 RMC with the name “TS 38.521: A.3.3.3-1 (15 kHz) “. The RMCs from 38.176 are basically a shortened form of the names of the RMCs. For example “TS38176_FR1A352” corresponds to RMC with the name “TS 38.176: M-FR1-A3_5_2”.

userNull Repeated capability selector

cellNull Repeated capability selector

bwPartNull Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.

PreviousNext

© Copyright © Rohde & Schwarz 2026.