Source:Bb:Nr5G:Scheduling:Cell:Subf:User:BwPart:Alloc:Content#

SCPI Commands

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:CONTent

Direct SCPI Members

Nr5GcontentEnum Get ( )#
Nr5GcontentEnum Get ( CellNullRepCap cellNull, SubframeNullRepCap subframeNull, UserNullRepCap userNull, BwPartNullRepCap bwPartNull, AllocationNullRepCap allocationNull )
// SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:CONTent
Nr5GcontentEnum value = driver.Source.Bb.Nr5G.Scheduling.Cell.Subf.User.BwPart.Alloc.Content.Get();
Nr5GcontentEnum value = driver.Source.Bb.Nr5G.Scheduling.Cell.Subf.User.BwPart.Alloc.Content.Get(CellNullRepCap.Default, SubframeNullRepCap.Default, UserNullRepCap.Default, BwPartNullRepCap.Default, AllocationNullRepCap.Default);

Selects the allocation type. Note that the available parameters for this set of commands depends on the allocation you want to configure. For example, you can only configure puncturing allocations in the common allocations. Therefore, the setting command for common allocations only supports the PUNCturing parameter. Likewise, the commands to configure or query user allocation only support the parameters that represent user allocations (e.g. PDSCh, COREset etc.) For an overview of all allocation types and their availability, see “Content”. Note that some allocation types require a specific firmware option.

  • PDSCh | COReset | SPBCh | DUMRe | CSIRs | PRS | LTECrs | PUNCturing: Downlink allocation types.

  • PUSCh | PUCCh | PRACh | DUMRe | SRS | PUNCturing: Uplink allocation types.

  • SSSPbch | PSBCh | PSCCh | PSSCh | PSFCh | PSCSs: Sidelink allocation types

cellNull Repeated capability selector

subframeNull Repeated capability selector

userNull Repeated capability selector

bwPartNull Repeated capability selector

allocationNull Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.