Source:Bb:Nr5G:Node:Cell:SyInfo:Hacbook#

SCPI Commands

[SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:SYINfo:HACBook

Direct SCPI Members

AllHarqAckCodebookEnum Get ( )#
AllHarqAckCodebookEnum Get ( CellNullRepCap cellNull )
// SCPI: [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:SYINfo:HACBook
AllHarqAckCodebookEnum value = driver.Source.Bb.Nr5G.Node.Cell.SyInfo.Hacbook.Get();
AllHarqAckCodebookEnum value = driver.Source.Bb.Nr5G.Node.Cell.SyInfo.Hacbook.Get(CellNullRepCap.Default);

Defines the HARQ ACK reporting according to the PDSCH HARQ ACK codebook.

harqAckCodebook: SEMistatic | DYNamic

  • SEMistatic: Sets the HARQ ACK reporting according to the PDSCH HARQ ACK codebook to Semi-static.A UE reports HARQ ACK information for a corresponding PDSCH reception or SPS PDSCH release only in a HARQ ACK codebook that the UE transmits in a slot indicated by a value of a PDSCH-to- HARQ feedback timing indicator field in a corresponding DCI format 1_0 or DCI format 1_1.The UE reports NACK values for HARQ-ACK information bits in an HARQ-ACK codebook that the UE transmits in a slot not indicated by a value of a PDSCH-to-HARQ feedback timing indicator field in a corresponding DCI format 1_0 or DCI format 1_1.

  • DYNamic: Sets the HARQ ACK reporting according to the PDSCH HARQ ACK codebook to dynamic.For a serving cell, an active DL BWP, and an active UL BWP, as described in clause 12, the UE determines a set of occasions for candidate PDSCH receptions for which the UE can transmit corresponding HARQ ACK information in a PUCCH in slot . If serving cell is deactivated, the UE uses as the active DL BWP for determining the set of occasions for candidate PDSCH receptions a DL BWP provided by firstActiveDownlinkBWP-ID.

cellNull Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.