Source:Bb:Graphics:SymbolRate#

SCPI Commands

[SOURce<HW>]:BB:GRAPhics:SRATe:MODE
[SOURce<HW>]:BB:GRAPhics:SRATe:USER

Direct SCPI Members

TranRecSampFactModeEnum Mode#
// SCPI: [SOURce<HW>]:BB:GRAPhics:SRATe:MODE
TranRecSampFactModeEnum value = driver.Source.Bb.Graphics.SymbolRate.Mode;
driver.Source.Bb.Graphics.SymbolRate.Mode = TranRecSampFactModeEnum.AUTO;

Sets how the time resolution of the signal is determined. Maximum resolution corresponds to a diagram covering the entire signal bandwidth. The higher the resolution is, the shorter the length of the displayed signal segment will be for the specified recording depth.

mode: AUTO | FULL | USER


double User#
// SCPI: [SOURce<HW>]:BB:GRAPhics:SRATe:USER
double value = driver.Source.Bb.Graphics.SymbolRate.User;
driver.Source.Bb.Graphics.SymbolRate.User = 1.0;

(Enabled for BB:GRAPH:SRAT:MODE USER) Selects the signal bandwidth for the diagram. The setting range moves between the minimum and maximum bandwidth which is possible for the selected graphical signal display. The selection is made graphically by moving the pointer.

user: float