Source:Bb:Gnss:System:Sbas#
SCPI Commands
- [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:[STATe]
Cloning the Group
// Create a clone of the original group, that exists independently
var sbas2 = driver.Source.Bb.Gnss.System.Sbas.Clone();
Direct SCPI Members
- bool State#
// SCPI: [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:[STATe] bool value = driver.Source.Bb.Gnss.System.Sbas.State;Queries if at least one of the SBAS system is enabled.
state: 1 | ON | 0| OFF
1: At least one SBAS system is enabled.To enable each of the SBAS systems, use the corresponding command, e.g. [:SOURcehw]:BB:GNSS:SYSTem:SBAS:EGNOS[:STATe].
0: All SBAS systems are disabled.
Subgroups