Source:Bb:Gnss:Receiver:V:Environment:Rpl:Rwindow:Strajectory#
SCPI Commands
- [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:RPL:RWINdow:STRajectory
Direct SCPI Members
- void Set ( VehicleRepCap vehicle )#
- void SetAndWait ( VehicleRepCap vehicle )#
- void SetAndWait ( VehicleRepCap vehicle, int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:RPL:RWINdow:STRajectory driver.Source.Bb.Gnss.Receiver.V.Environment.Rpl.Rwindow.Strajectory.Set(VehicleRepCap.Default); driver.Source.Bb.Gnss.Receiver.V.Environment.Rpl.Rwindow.Strajectory.SetAndWait(VehicleRepCap.Default); driver.Source.Bb.Gnss.Receiver.V.Environment.Rpl.Rwindow.Strajectory.SetAndWait(VehicleRepCap.Default, 1000);Sets the length of the repetition intervall equal to trajectory length of the waypoint file. Aligning both lengths is useful to ensure that the obscuration pattern repeats itself at each repetition of the waypoint file.
vehicleRepeated capability selectorSetAndWait is the same as Set, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.