Source:Bb:Gnss:Receiver:V:Environment:Mpath:Copy:Execute#

SCPI Commands

[SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:MPATh:COPY:EXECute

Direct SCPI Members

void Set ( VehicleRepCap vehicle )#
void SetAndWait ( VehicleRepCap vehicle )#
void SetAndWait ( VehicleRepCap vehicle, int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:MPATh:COPY:EXECute
driver.Source.Bb.Gnss.Receiver.V.Environment.Mpath.Copy.Execute.Set(VehicleRepCap.Default);
driver.Source.Bb.Gnss.Receiver.V.Environment.Mpath.Copy.Execute.SetAndWait(VehicleRepCap.Default);
driver.Source.Bb.Gnss.Receiver.V.Environment.Mpath.Copy.Execute.SetAndWait(VehicleRepCap.Default, 1000);

Copies the multipath configuration of the source GNSS System and SV ID to the target SV ID and GNSS system or to all SV IDs from a system. Set the source with:

Set the target with:

vehicle Repeated capability selector

SetAndWait is the same as Set, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.