Source:Bb:Dvb:Dvbs:ThConfig#
SCPI Commands
- [SOURce<HW>]:BB:DVB:DVBS:THConfig:CCOunter
- [SOURce<HW>]:BB:DVB:DVBS:THConfig:PUS
- [SOURce<HW>]:BB:DVB:DVBS:THConfig:SCONtrol
- [SOURce<HW>]:BB:DVB:DVBS:THConfig:TPRiority
- [SOURce<HW>]:BB:DVB:DVBS:THConfig:[STATe]
Cloning the Group
// Create a clone of the original group, that exists independently
var thConfig2 = driver.Source.Bb.Dvb.Dvbs.ThConfig.Clone();
Direct SCPI Members
- int Ccounter#
// SCPI: [SOURce<HW>]:BB:DVB:DVBS:THConfig:CCOunter int value = driver.Source.Bb.Dvb.Dvbs.ThConfig.Ccounter; driver.Source.Bb.Dvb.Dvbs.ThConfig.Ccounter = 1;Sets the sequence number of the first payload packet.
ccounter: integer
- bool Pus#
// SCPI: [SOURce<HW>]:BB:DVB:DVBS:THConfig:PUS bool value = driver.Source.Bb.Dvb.Dvbs.ThConfig.Pus; driver.Source.Bb.Dvb.Dvbs.ThConfig.Pus = false;If enabled, the PES (packetized elementary streams) , PSI (program specific information) , or DVB-MIP (megaframe initialization) packet begin immediately after the header.
psuIndication: 1 | ON | 0| OFF
- int Scontrol#
// SCPI: [SOURce<HW>]:BB:DVB:DVBS:THConfig:SCONtrol int value = driver.Source.Bb.Dvb.Dvbs.ThConfig.Scontrol; driver.Source.Bb.Dvb.Dvbs.ThConfig.Scontrol = 1;Sets the scrambling information.
scontrol: integer
- int Tpriority#
// SCPI: [SOURce<HW>]:BB:DVB:DVBS:THConfig:TPRiority int value = driver.Source.Bb.Dvb.Dvbs.ThConfig.Tpriority; driver.Source.Bb.Dvb.Dvbs.ThConfig.Tpriority = 1;Marks the current packet as high priority packet compared to packets with the same PID.
tpriority: integer
- bool State#
// SCPI: [SOURce<HW>]:BB:DVB:DVBS:THConfig:[STATe] bool value = driver.Source.Bb.Dvb.Dvbs.ThConfig.State; driver.Source.Bb.Dvb.Dvbs.ThConfig.State = false;Inserts header information in the transport stream.
state: 1 | ON | 0| OFF
Subgroups