Source:Bb:C2K:Crate#

SCPI Commands

[SOURce<HW>]:BB:C2K:CRATe:VARiation
[SOURce<HW>]:BB:C2K:CRATe

Direct SCPI Members

double Variation#
// SCPI: [SOURce<HW>]:BB:C2K:CRATe:VARiation
double value = driver.Source.Bb.C2K.Crate.Variation;
driver.Source.Bb.C2K.Crate.Variation = 1.0;

Sets the output chip rate. The output chip rate changes the output clock and the modulation bandwidth, as well as the synchronization signals that are output. It does not affect the calculated chip sequence.

variation: float


Cdma2KchipRateEnum Value#
// SCPI: [SOURce<HW>]:BB:C2K:CRATe
Cdma2KchipRateEnum value = driver.Source.Bb.C2K.Crate.Value;

The command queries the spreading rate. The output chip rate which determines the rate of the spread symbols as is used for signal output can be set with the command SOUR:BB:C2K:CRAT:VAR.

crate: R1M2