Source:Bb:C2K:Copy#

SCPI Commands

[SOURce<HW>]:BB:C2K:COPY:COFFset
[SOURce<HW>]:BB:C2K:COPY:DESTination
[SOURce<HW>]:BB:C2K:COPY:SOURce

Cloning the Group

// Create a clone of the original group, that exists independently
var copy2 = driver.Source.Bb.C2K.Copy.Clone();

Direct SCPI Members

int Coffset#
// SCPI: [SOURce<HW>]:BB:C2K:COPY:COFFset
int value = driver.Source.Bb.C2K.Copy.Coffset;
driver.Source.Bb.C2K.Copy.Coffset = 1;

The command sets the offset for the Walsh code in the destination base station. The minimum value is 0 (Walsh codes are identical) , the maximum value is 255. This command is only available in the downlink (SOUR:BB:C2K:LINK FORW/DOWN) .

coffset: integer


NumberAenum Destination#
// SCPI: [SOURce<HW>]:BB:C2K:COPY:DESTination
NumberAenum value = driver.Source.Bb.C2K.Copy.Destination;
driver.Source.Bb.C2K.Copy.Destination = NumberAenum._1;

The command selects the station to which data is to be copied. Whether the data is copied to a base station or a mobile station depends on which transmission direction is selected (command C2K:LINK UP | DOWN) .

destination: 1 | 2| 3 | 4


NumberAenum Source#
// SCPI: [SOURce<HW>]:BB:C2K:COPY:SOURce
NumberAenum value = driver.Source.Bb.C2K.Copy.Source;
driver.Source.Bb.C2K.Copy.Source = NumberAenum._1;

The command selects the station that has data to be copied. Whether the station copied is a base or mobile station depends on which transmission direction is selected (command C2K:LINK UP | DOWN) .

source: 1 | 2| 3 | 4


Subgroups