Source:Bb:C2K:Bstation:Cgroup:Coffset:Tpc:Misuse#

SCPI Commands

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:TPC:MISuse

Direct SCPI Members

bool Get ( )#
bool Get ( BaseStationRepCap baseStation, GroupNullRepCap groupNull, OffsetRepCap offset )
void Set ( bool misuse )#
void Set ( bool misuse, BaseStationRepCap baseStation, GroupNullRepCap groupNull, OffsetRepCap offset )
// SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:TPC:MISuse
// Get:
bool value = driver.Source.Bb.C2K.Bstation.Cgroup.Coffset.Tpc.Misuse.Get();
bool value = driver.Source.Bb.C2K.Bstation.Cgroup.Coffset.Tpc.Misuse.Get(BaseStationRepCap.Default, GroupNullRepCap.Default, OffsetRepCap.Default);
// Set:
driver.Source.Bb.C2K.Bstation.Cgroup.Coffset.Tpc.Misuse.Set(false, BaseStationRepCap.Default, GroupNullRepCap.Default, OffsetRepCap.Default);
driver.Source.Bb.C2K.Bstation.Cgroup.Coffset.Tpc.Misuse.Set(false);

The command activates “mis-” use of the power control bits of the selected F-DCCH or F- FCH for controlling the channel powers of these channels. Power control is available for sub channel types F-DCCH and F-FCH. F-DCCH is only generated for radio configurations 3, 4 and 5. The bit pattern (see commands BB:C2K:BSTation<n>:CGRoup<n>:COFFset<n>:TPC…) of the power control bits of each channel is used to control the channel power. A “1” leads to an increase of channel powers, a “0” to a reduction of channel powers. Channel power is limited to the range 0 dB to -80 dB. The step width of the change is defined with the command method RsSmw.Source.Bb.C2K.Bstation.Cgroup.Coffset.Tpc.Pstep.Set. For the traffic channels, this value is specific for the selected radio configuration.

misuse 1 | ON | 0| OFF

baseStation Repeated capability selector

groupNull Repeated capability selector

offset Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.