Source:Bb:C2K:Bstation:Cgroup:Coffset:Data:Rate#

SCPI Commands

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:DATA:RATE

Direct SCPI Members

Cdma2KdataRateEnum Get ( )#
Cdma2KdataRateEnum Get ( BaseStationRepCap baseStation, GroupNullRepCap groupNull, OffsetRepCap offset )
void Set ( Cdma2KdataRateEnum rate )#
void Set ( Cdma2KdataRateEnum rate, BaseStationRepCap baseStation, GroupNullRepCap groupNull, OffsetRepCap offset )
// SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:DATA:RATE
// Get:
Cdma2KdataRateEnum value = driver.Source.Bb.C2K.Bstation.Cgroup.Coffset.Data.Rate.Get();
Cdma2KdataRateEnum value = driver.Source.Bb.C2K.Bstation.Cgroup.Coffset.Data.Rate.Get(BaseStationRepCap.Default, GroupNullRepCap.Default, OffsetRepCap.Default);
// Set:
driver.Source.Bb.C2K.Bstation.Cgroup.Coffset.Data.Rate.Set(Cdma2KdataRateEnum.DR1036K8, BaseStationRepCap.Default, GroupNullRepCap.Default, OffsetRepCap.Default);
driver.Source.Bb.C2K.Bstation.Cgroup.Coffset.Data.Rate.Set(Cdma2KdataRateEnum.DR1036K8);

The command sets the data rate for the specified channel. The value range depends on the channel type, the selected radio configuration and the frame length. Parameter NUSed is returned for channel 0-1 to 0-4. For the traffic channels, this value is specific for the selected radio configuration. The value range depends on the frame length. If the frame length is changed so that the set data rate becomes invalid, the next permissible value is automatically set. The data rate affects the Walsh code (spreading factor) that are possible within a channel. If a data rate is changed so that the selected Walsh code becomes invalid, the next permissible value is automatically set.

rate DR1K2 | DR1K3 | DR1K5 | DR1K8 | DR2K4 | DR2K7 | DR3K6 | DR4K8 | DR7K2 | DR9K6 | DR14K4 | DR19K2 | DR28K8 | DR38K4 | DR57K6 | DR76K8 | DR115K2 | DR153K6 | DR230K4 | DR307K2 | NUSed

baseStation Repeated capability selector

groupNull Repeated capability selector

offset Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.