Source:Bb:Btooth:Econfiguration:Pconfiguration:Tphys:Lcod#

SCPI Commands

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe

Direct SCPI Members

bool State#
// SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe
bool value = driver.Source.Bb.Btooth.Econfiguration.Pconfiguration.Tphys.Lcod.State;

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

tphys: 1 | ON | 0| OFF