Source:Bb:Arbitrary:Tsignal:Sine#
SCPI Commands
- [SOURce<HW>]:BB:ARBitrary:TSIGnal:SINE:FREQuency
- [SOURce<HW>]:BB:ARBitrary:TSIGnal:SINE:PHASe
- [SOURce<HW>]:BB:ARBitrary:TSIGnal:SINE:SAMPles
Cloning the Group
// Create a clone of the original group, that exists independently
var sine2 = driver.Source.Bb.Arbitrary.Tsignal.Sine.Clone();
Direct SCPI Members
- double Frequency#
// SCPI: [SOURce<HW>]:BB:ARBitrary:TSIGnal:SINE:FREQuency double value = driver.Source.Bb.Arbitrary.Tsignal.Sine.Frequency; driver.Source.Bb.Arbitrary.Tsignal.Sine.Frequency = 1.0;Sets the frequency of the simple sinusoidal test signal.
frequency: float
- double Phase#
// SCPI: [SOURce<HW>]:BB:ARBitrary:TSIGnal:SINE:PHASe double value = driver.Source.Bb.Arbitrary.Tsignal.Sine.Phase; driver.Source.Bb.Arbitrary.Tsignal.Sine.Phase = 1.0;Sets the phase offset of the sine wave on the Q channel relative to the sine wave on the I channel.
phase: float
- int Samples#
// SCPI: [SOURce<HW>]:BB:ARBitrary:TSIGnal:SINE:SAMPles int value = driver.Source.Bb.Arbitrary.Tsignal.Sine.Samples; driver.Source.Bb.Arbitrary.Tsignal.Sine.Samples = 1;Sets the sample rate for the sine signal in samples per period. Make sure that the resulting clock rate does not exceed the maximum ARB clock rate. The maximum value is automatically restricted by reference to the set frequency and has to fulfill the rule Frequency * Samples <= ARB clock rate. For more information, refer to the specifications document.
samples: integer
Subgroups