Source:Bb:Arbitrary:Clock#

SCPI Commands

[SOURce<HW>]:BB:ARBitrary:CLOCk:MODE
[SOURce<HW>]:BB:ARBitrary:CLOCk:MULTiplier
[SOURce<HW>]:BB:ARBitrary:CLOCk:SOURce
[SOURce<HW>]:BB:ARBitrary:CLOCk

Direct SCPI Members

ClocModeBenum Mode#
// SCPI: [SOURce<HW>]:BB:ARBitrary:CLOCk:MODE
ClocModeBenum value = driver.Source.Bb.Arbitrary.Clock.Mode;
driver.Source.Bb.Arbitrary.Clock.Mode = ClocModeBenum.MSAMple;

Enters the type of externally supplied clock.

mode: SAMPle


int Multiplier#
// SCPI: [SOURce<HW>]:BB:ARBitrary:CLOCk:MULTiplier
int value = driver.Source.Bb.Arbitrary.Clock.Multiplier;
driver.Source.Bb.Arbitrary.Clock.Multiplier = 1;

No help available.


ClockSourceCenum Source#
// SCPI: [SOURce<HW>]:BB:ARBitrary:CLOCk:SOURce
ClockSourceCenum value = driver.Source.Bb.Arbitrary.Clock.Source;
driver.Source.Bb.Arbitrary.Clock.Source = ClockSourceCenum.ELCLock;

Selects the clock source:

  • INTernal: Internal clock reference

  • ELCLock: External local clock

  • EXTernal = ELCLock: Setting only Provided for backward compatibility with other Rohde & Schwarz signal generators

source: INTernal | ELCLock | EXTernal


double Value#
// SCPI: [SOURce<HW>]:BB:ARBitrary:CLOCk
double value = driver.Source.Bb.Arbitrary.Clock.Value;
driver.Source.Bb.Arbitrary.Clock.Value = 1.0;

Sets the clock frequency. If you load a waveform, the clock rate is determined as defined with the waveform tag {CLOCK: frequency}. This command subsequently changes the clock rate; see specifications document for value range. In the case of an external clock source, the clock of the external source must be specified with this command. For more information, refer to the specifications document.

clock: float