Bler:Trigger#

SCPI Commands

BLER:TRIGger:MODE
BLER:TRIGger:SOURce

Cloning the Group

// Create a clone of the original group, that exists independently
var trigger2 = driver.Bler.Trigger.Clone();

Direct SCPI Members

BlerTrigModeEnum Mode#
// SCPI: BLER:TRIGger:MODE
BlerTrigModeEnum value = driver.Bler.Trigger.Mode;
driver.Bler.Trigger.Mode = BlerTrigModeEnum.AUTO;

Selects the type of measurement.

polarity: AUTO | SINGle

  • AUTO: Continuous measurement.Terminates the measurement in progress if one or both termination criteria are met. Delays the restart of a new measurement until the first measurement result has been queried. The resulting brief measurement interruption is irrelevant because the subsequent measurement is synchronized within 24 data bits.

  • SINGle: Single measurement, started with :BERT:TRIGger[:IMMediate] | :BLER:TRIGger[:IMMediate].


TrigSourBerBlerEnum Source#
// SCPI: BLER:TRIGger:SOURce
TrigSourBerBlerEnum value = driver.Bler.Trigger.Source;
driver.Bler.Trigger.Source = TrigSourBerBlerEnum.EGT1;

For method RsSmw.Bler.Trigger.ModeSINGle, selects the source of the trigger signal.

polarity: INTernal | EGT1


Subgroups