Source code for RsSmbv.Implementations.Trigger.FreqSweep.Immediate

from ....Internal.Core import Core
from ....Internal.CommandsGroup import CommandsGroup
from .... import repcap


# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class ImmediateCls: """Immediate commands group definition. 1 total commands, 0 Subgroups, 1 group commands""" def __init__(self, core: Core, parent): self._core = core self._cmd_group = CommandsGroup("immediate", core, parent)
[docs] def set(self, inputIx=repcap.InputIx.Default) -> None: """SCPI: TRIGger<HW>:FSWeep:[IMMediate] \n Snippet: driver.trigger.freqSweep.immediate.set(inputIx = repcap.InputIx.Default) \n INTRO_CMD_HELP: Performs a single sweep and immediately starts the activated, corresponding sweep: \n - FSWeep - RF frequency - PSWeep - RF level - LFFSweep - LF frequency - SWEep - all sweeps INTRO_CMD_HELP: Effective in the following configuration: \n - TRIG:FSW|LFFS|PSW|[:SWE]:SOUR SING - SOUR:SWE:FREQ|POW:MODE AUTO or SOUR:LFO:SWE:[FREQ:]MODE AUTO Alternatively, you can use the IMMediate command instead of the respective SWEep:[FREQ:]|POW:EXECute command. \n :param inputIx: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Trigger') """ inputIx_cmd_val = self._cmd_group.get_repcap_cmd_value(inputIx, repcap.InputIx) self._core.io.write(f'TRIGger{inputIx_cmd_val}:FSWeep:IMMediate')
[docs] def set_with_opc(self, inputIx=repcap.InputIx.Default, opc_timeout_ms: int = -1) -> None: inputIx_cmd_val = self._cmd_group.get_repcap_cmd_value(inputIx, repcap.InputIx) """SCPI: TRIGger<HW>:FSWeep:[IMMediate] \n Snippet: driver.trigger.freqSweep.immediate.set_with_opc(inputIx = repcap.InputIx.Default) \n INTRO_CMD_HELP: Performs a single sweep and immediately starts the activated, corresponding sweep: \n - FSWeep - RF frequency - PSWeep - RF level - LFFSweep - LF frequency - SWEep - all sweeps INTRO_CMD_HELP: Effective in the following configuration: \n - TRIG:FSW|LFFS|PSW|[:SWE]:SOUR SING - SOUR:SWE:FREQ|POW:MODE AUTO or SOUR:LFO:SWE:[FREQ:]MODE AUTO Alternatively, you can use the IMMediate command instead of the respective SWEep:[FREQ:]|POW:EXECute command. \n Same as set, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value. \n :param inputIx: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Trigger') :param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call.""" self._core.io.write_with_opc(f'TRIGger{inputIx_cmd_val}:FSWeep:IMMediate', opc_timeout_ms)