from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from .......Internal import Conversions
from ....... import enums
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class RabCls:
"""Rab commands group definition. 5 total commands, 1 Subgroups, 4 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("rab", core, parent)
@property
def mac(self):
"""mac commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_mac'):
from .Mac import MacCls
self._mac = MacCls(self._core, self._cmd_group)
return self._mac
# noinspection PyTypeChecker
[docs] def get_length(self) -> enums.EvdoRabLen:
"""SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:LENGth \n
Snippet: value: enums.EvdoRabLen = driver.source.bb.evdo.anetwork.rab.get_length() \n
Sets the duration (in slots) of a Reverse Activity bit. Note: This parameter is available for physical layer subtype 0&1
only. \n
:return: length: RL8| RL16| RL32| RL64
"""
response = self._core.io.query_str('SOURce<HwInstance>:BB:EVDO:ANETwork:RAB:LENGth?')
return Conversions.str_to_scalar_enum(response, enums.EvdoRabLen)
[docs] def set_length(self, length: enums.EvdoRabLen) -> None:
"""SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:LENGth \n
Snippet: driver.source.bb.evdo.anetwork.rab.set_length(length = enums.EvdoRabLen.RL16) \n
Sets the duration (in slots) of a Reverse Activity bit. Note: This parameter is available for physical layer subtype 0&1
only. \n
:param length: RL8| RL16| RL32| RL64
"""
param = Conversions.enum_scalar_to_str(length, enums.EvdoRabLen)
self._core.io.write(f'SOURce<HwInstance>:BB:EVDO:ANETwork:RAB:LENGth {param}')
[docs] def get_level(self) -> float:
"""SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:LEVel \n
Snippet: value: float = driver.source.bb.evdo.anetwork.rab.get_level() \n
Sets the power within the MAC block for the Reverse Activity channel. \n
:return: level: float Range: -25 to -7
"""
response = self._core.io.query_str('SOURce<HwInstance>:BB:EVDO:ANETwork:RAB:LEVel?')
return Conversions.str_to_float(response)
[docs] def set_level(self, level: float) -> None:
"""SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:LEVel \n
Snippet: driver.source.bb.evdo.anetwork.rab.set_level(level = 1.0) \n
Sets the power within the MAC block for the Reverse Activity channel. \n
:param level: float Range: -25 to -7
"""
param = Conversions.decimal_value_to_str(level)
self._core.io.write(f'SOURce<HwInstance>:BB:EVDO:ANETwork:RAB:LEVel {param}')
[docs] def get_offset(self) -> int:
"""SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:OFFSet \n
Snippet: value: int = driver.source.bb.evdo.anetwork.rab.get_offset() \n
Sets the starting time offset of the Reverse Activity bit in slots. The command is specified in Reverse Activity Length/8
units. The RA bit starts when the following equation is satisfied: System Time mod RAB length = RAB Offset, where System
Time is expressed in slots. Note: This parameter is available for physical layer subtype 0&1 only. \n
:return: offset: integer Range: 0 to 7
"""
response = self._core.io.query_str('SOURce<HwInstance>:BB:EVDO:ANETwork:RAB:OFFSet?')
return Conversions.str_to_int(response)
[docs] def set_offset(self, offset: int) -> None:
"""SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:OFFSet \n
Snippet: driver.source.bb.evdo.anetwork.rab.set_offset(offset = 1) \n
Sets the starting time offset of the Reverse Activity bit in slots. The command is specified in Reverse Activity Length/8
units. The RA bit starts when the following equation is satisfied: System Time mod RAB length = RAB Offset, where System
Time is expressed in slots. Note: This parameter is available for physical layer subtype 0&1 only. \n
:param offset: integer Range: 0 to 7
"""
param = Conversions.decimal_value_to_str(offset)
self._core.io.write(f'SOURce<HwInstance>:BB:EVDO:ANETwork:RAB:OFFSet {param}')
[docs] def get_state(self) -> bool:
"""SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:STATe \n
Snippet: value: bool = driver.source.bb.evdo.anetwork.rab.get_state() \n
Activates or deactivates the reverse activity bit (RAB) . \n
:return: state: 1| ON| 0| OFF
"""
response = self._core.io.query_str('SOURce<HwInstance>:BB:EVDO:ANETwork:RAB:STATe?')
return Conversions.str_to_bool(response)
[docs] def set_state(self, state: bool) -> None:
"""SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:STATe \n
Snippet: driver.source.bb.evdo.anetwork.rab.set_state(state = False) \n
Activates or deactivates the reverse activity bit (RAB) . \n
:param state: 1| ON| 0| OFF
"""
param = Conversions.bool_to_str(state)
self._core.io.write(f'SOURce<HwInstance>:BB:EVDO:ANETwork:RAB:STATe {param}')
def clone(self) -> 'RabCls':
"""Clones the group by creating new object from it and its whole existing subgroups
Also copies all the existing default Repeated Capabilities setting,
which you can change independently without affecting the original group"""
new_group = RabCls(self._core, self._cmd_group.parent)
self._cmd_group.synchronize_repcaps(new_group)
return new_group