from ...........Internal.Core import Core
from ...........Internal.CommandsGroup import CommandsGroup
from ...........Internal import Conversions
from ........... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class RealCls:
"""Real commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("real", core, parent)
[docs] def set(self, ant_port_map_dat: float, antennaPortNull=repcap.AntennaPortNull.Default, row=repcap.Row.Default) -> None:
"""SCPI: [SOURce<HW>]:BB:EUTRa:DL:MIMO:APM:CS:AP<DIR0>:ROW<ST0>:REAL \n
Snippet: driver.source.bb.eutra.downlink.mimo.apm.cs.ap.row.real.set(ant_port_map_dat = 1.0, antennaPortNull = repcap.AntennaPortNull.Default, row = repcap.Row.Default) \n
Define the mapping of the antenna ports to the physical antennas. \n
:param ant_port_map_dat: 0| 1 (for AP = 0 to 3) ; float (for AP = 4 | 6 | 15 to 46) To map an AP, use the command SOURce1:BB:EUTRa:DL:MIMO:APM:CS:AP0|1|2|3:ROW0|1|2|3:REAL 1. The corresponding ...:CS:AP0|1|2|3:ROW0|1|2|3:IMAG command has no effect. The REAL (Magnitude) and IMAGinary (Phase) values are interdependent. Their value ranges change depending on each other and so that the resulting complex value is as follows: |REAL+j*IMAGinary| <= 1 Otherwise, the values are normalized to Magnitude = 1. Range: -1 to 360
:param antennaPortNull: optional repeated capability selector. Default value: Nr0 (settable in the interface 'Ap')
:param row: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Row')
"""
param = Conversions.decimal_value_to_str(ant_port_map_dat)
antennaPortNull_cmd_val = self._cmd_group.get_repcap_cmd_value(antennaPortNull, repcap.AntennaPortNull)
row_cmd_val = self._cmd_group.get_repcap_cmd_value(row, repcap.Row)
self._core.io.write(f'SOURce<HwInstance>:BB:EUTRa:DL:MIMO:APM:CS:AP{antennaPortNull_cmd_val}:ROW{row_cmd_val}:REAL {param}')
[docs] def get(self, antennaPortNull=repcap.AntennaPortNull.Default, row=repcap.Row.Default) -> float:
"""SCPI: [SOURce<HW>]:BB:EUTRa:DL:MIMO:APM:CS:AP<DIR0>:ROW<ST0>:REAL \n
Snippet: value: float = driver.source.bb.eutra.downlink.mimo.apm.cs.ap.row.real.get(antennaPortNull = repcap.AntennaPortNull.Default, row = repcap.Row.Default) \n
Define the mapping of the antenna ports to the physical antennas. \n
:param antennaPortNull: optional repeated capability selector. Default value: Nr0 (settable in the interface 'Ap')
:param row: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Row')
:return: ant_port_map_dat: 0| 1 (for AP = 0 to 3) ; float (for AP = 4 | 6 | 15 to 46) To map an AP, use the command SOURce1:BB:EUTRa:DL:MIMO:APM:CS:AP0|1|2|3:ROW0|1|2|3:REAL 1. The corresponding ...:CS:AP0|1|2|3:ROW0|1|2|3:IMAG command has no effect. The REAL (Magnitude) and IMAGinary (Phase) values are interdependent. Their value ranges change depending on each other and so that the resulting complex value is as follows: |REAL+j*IMAGinary| <= 1 Otherwise, the values are normalized to Magnitude = 1. Range: -1 to 360"""
antennaPortNull_cmd_val = self._cmd_group.get_repcap_cmd_value(antennaPortNull, repcap.AntennaPortNull)
row_cmd_val = self._cmd_group.get_repcap_cmd_value(row, repcap.Row)
response = self._core.io.query_str(f'SOURce<HwInstance>:BB:EUTRa:DL:MIMO:APM:CS:AP{antennaPortNull_cmd_val}:ROW{row_cmd_val}:REAL?')
return Conversions.str_to_float(response)