Source

SCPI Command :

TRIGger<HW>:LFFSweep:SOURce

class SourceCls

Source commands group definition. 2 total commands, 1 Subgroups, 1 group commands

get(inputIx=InputIx.Default) → RsSmbv.enums.SingExtAuto

# SCPI: TRIGger<HW>:LFFSweep:SOURce
value: enums.SingExtAuto = driver.trigger.lffSweep.source.get(inputIx = repcap.InputIx.Default)


    INTRO_CMD_HELP: Selects the trigger source for the corresponding sweeps:

    - FSWeep - RF frequency
    - LFFSweep - LF frequency
    - PSWeep - RF level
    - SWEep - all sweeps

The source names of the parameters correspond to the values provided in manual control of the instrument. They differ from the SCPI-compliant names, but the instrument accepts both variants. Use the SCPI name, if compatibility is an important issue. Find the corresponding SCPI-compliant commands in Cross-reference between the manual and remote control.

param inputIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

return

source: AUTO| IMMediate | SINGle| BUS | EXTernal | EAUTo AUTO [IMMediate] Executes a sweep automatically. In this free-running mode, the trigger condition is met continuously. I.e. when a sweep is completed, the next one starts immediately. SINGle [BUS] Executes one complete sweep cycle. The following commands initiate a trigger event: *TRG [:SOURcehw]:SWEep:POWer:EXECute [:SOURcehw]:SWEep[:FREQuency]:EXECute method RsSmbv.Trigger.Sweep.Immediate.set, method RsSmbv.Trigger.Psweep.Immediate.set and method RsSmbv.Trigger.FreqSweep.Immediate.set. Set the sweep mode with the commands: [:SOURcehw]:SWEep:POWer:MODEAUTO|STEP [:SOURcehw]:SWEep[:FREQuency]:MODEAUTO|STEP [:SOURcehw]:LFOutput:SWEep[:FREQuency]:MODEAUTO|STEP In step mode (STEP) , the instrument executes only one step. EXTernal An external signal triggers the sweep. EAUTo An external signal triggers the sweep. When one sweep is finished, the next sweep starts. A second trigger event stops the sweep at the current frequency, a third trigger event starts the trigger at the start frequency, and so on.

set(source: RsSmbv.enums.SingExtAuto, inputIx=InputIx.Default) → None

# SCPI: TRIGger<HW>:LFFSweep:SOURce
driver.trigger.lffSweep.source.set(source = enums.SingExtAuto.AUTO, inputIx = repcap.InputIx.Default)


    INTRO_CMD_HELP: Selects the trigger source for the corresponding sweeps:

    - FSWeep - RF frequency
    - LFFSweep - LF frequency
    - PSWeep - RF level
    - SWEep - all sweeps

The source names of the parameters correspond to the values provided in manual control of the instrument. They differ from the SCPI-compliant names, but the instrument accepts both variants. Use the SCPI name, if compatibility is an important issue. Find the corresponding SCPI-compliant commands in Cross-reference between the manual and remote control.

param source

AUTO| IMMediate | SINGle| BUS | EXTernal | EAUTo AUTO [IMMediate] Executes a sweep automatically. In this free-running mode, the trigger condition is met continuously. I.e. when a sweep is completed, the next one starts immediately. SINGle [BUS] Executes one complete sweep cycle. The following commands initiate a trigger event: *TRG [:SOURcehw]:SWEep:POWer:EXECute [:SOURcehw]:SWEep[:FREQuency]:EXECute method RsSmbv.Trigger.Sweep.Immediate.set, method RsSmbv.Trigger.Psweep.Immediate.set and method RsSmbv.Trigger.FreqSweep.Immediate.set. Set the sweep mode with the commands: [:SOURcehw]:SWEep:POWer:MODEAUTO|STEP [:SOURcehw]:SWEep[:FREQuency]:MODEAUTO|STEP [:SOURcehw]:LFOutput:SWEep[:FREQuency]:MODEAUTO|STEP In step mode (STEP) , the instrument executes only one step. EXTernal An external signal triggers the sweep. EAUTo An external signal triggers the sweep. When one sweep is finished, the next sweep starts. A second trigger event stops the sweep at the current frequency, a third trigger event starts the trigger at the start frequency, and so on.

param inputIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.trigger.lffSweep.source.clone()

Subgroups

• Advanced