Execute

SCPI Command :

[SOURce<HW>]:SWEep:POWer:EXECute

class ExecuteCls

Execute commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None

# SCPI: [SOURce<HW>]:SWEep:POWer:EXECute
driver.source.sweep.power.execute.set()

Executes an RF frequency sweep. The command performs a single sweep and is therefore only effective in manual sweep mode.

set_with_opc(opc_timeout_ms: int = - 1) → None

# SCPI: [SOURce<HW>]:SWEep:POWer:EXECute
driver.source.sweep.power.execute.set_with_opc()

Executes an RF frequency sweep. The command performs a single sweep and is therefore only effective in manual sweep mode.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.