Execute

SCPI Command :

[SOURce<HW>]:SWEep:COMBined:EXECute

Commands in total: 1
Subgroups: 0
Direct child commands: 1

set() → None[source]

# [SOURce<HW>]:SWEep:COMBined:EXECute
driver.source.sweep.combined.execute.set()

Executes an RF frequency / level sweep cycle. The command triggers one single sweep manually. Therefore, you can use it in manual sweep mode, selected with the command [:SOURce<hw>]:SWEep:COMBined:MODE > MANual.

set_with_opc(opc_timeout_ms: int = -1) → None[source]

# [SOURce<HW>]:SWEep:COMBined:EXECute
driver.source.sweep.combined.execute.set_with_opc()

Executes an RF frequency / level sweep cycle. The command triggers one single sweep manually. Therefore, you can use it in manual sweep mode, selected with the command [:SOURce<hw>]:SWEep:COMBined:MODE > MANual.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

Parameters:: opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.