Adjust

SCPI Commands :

[SOURce]:ROSCillator:[INTernal]:ADJust:VALue
[SOURce]:ROSCillator:[INTernal]:ADJust:[STATe]

class AdjustCls

Adjust commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_state() → bool

# SCPI: [SOURce]:ROSCillator:[INTernal]:ADJust:[STATe]
value: bool = driver.source.roscillator.internal.adjust.get_state()

Determines whether the calibrated (off) or a user-defined (on) adjustment value is used for fine adjustment of the frequency.

return

state: 1| ON| 0| OFF 0 Fine adjustment with the calibrated frequency value 1 User-defined adjustment value. The instrument is no longer in the calibrated state. The calibration value is, however, not changed. The instrument resumes the calibrated state if you send SOURce:ROSCillator:INTernal:ADJust:STATe 0.

get_value() → int

# SCPI: [SOURce]:ROSCillator:[INTernal]:ADJust:VALue
value: int = driver.source.roscillator.internal.adjust.get_value()

Specifies the frequency correction value (adjustment value) .

return

value: integer

set_state(state: bool) → None

# SCPI: [SOURce]:ROSCillator:[INTernal]:ADJust:[STATe]
driver.source.roscillator.internal.adjust.set_state(state = False)

Determines whether the calibrated (off) or a user-defined (on) adjustment value is used for fine adjustment of the frequency.

param state

1| ON| 0| OFF 0 Fine adjustment with the calibrated frequency value 1 User-defined adjustment value. The instrument is no longer in the calibrated state. The calibration value is, however, not changed. The instrument resumes the calibrated state if you send SOURce:ROSCillator:INTernal:ADJust:STATe 0.

set_value(value: int) → None

# SCPI: [SOURce]:ROSCillator:[INTernal]:ADJust:VALue
driver.source.roscillator.internal.adjust.set_value(value = 1)

Specifies the frequency correction value (adjustment value) .

param value

integer