Source

SCPI Command :

[SOURce<HW>]:PM<CH>:SOURce

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(generatorIx=GeneratorIx.Default) → AmFmSource[source]

# [SOURce<HW>]:PM<CH>:SOURce
value: enums.AmFmSource = driver.source.pm.source.get(generatorIx = repcap.GeneratorIx.Default)

Selects the modulation source for phase modulation signal.

Parameters:: generatorIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pm’)
Returns:: source: EXT1 | NOISe | LF2 | LF1 | INTernal | EXTernal LF1 | LF2 Uses an internally generated LF signal. EXT1 Uses an externally supplied LF signal. NOISe Uses the internally generated noise signal. INTernal Uses the internally generated signal of LF1. EXTernal Uses an external LF signal (EXT1) .

set(source: AmFmSource, generatorIx=GeneratorIx.Default) → None[source]

# [SOURce<HW>]:PM<CH>:SOURce
driver.source.pm.source.set(source = enums.AmFmSource.EXT1, generatorIx = repcap.GeneratorIx.Default)

Selects the modulation source for phase modulation signal.

Parameters:

source – EXT1 | NOISe | LF2 | LF1 | INTernal | EXTernal LF1 | LF2 Uses an internally generated LF signal. EXT1 Uses an externally supplied LF signal. NOISe Uses the internally generated noise signal. INTernal Uses the internally generated signal of LF1. EXTernal Uses an external LF signal (EXT1) .
generatorIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pm’)