Execute

SCPI Command :

[SOURce<HW>]:LFOutput:SWEep:[FREQuency]:EXECute

class ExecuteCls[source]

Execute commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None[source]

# SCPI: [SOURce<HW>]:LFOutput:SWEep:[FREQuency]:EXECute
driver.source.lfOutput.sweep.frequency.execute.set()

Immediately starts an LF sweep. [:SOURce<hw>]:LFOutput:SWEep[:FREQuency]:MODE determines which sweep is executed, e.g. SOURce:LFOutput:SWEep:FREQuency:MODE STEP.

set_with_opc(opc_timeout_ms: int = - 1) → None[source]

# SCPI: [SOURce<HW>]:LFOutput:SWEep:[FREQuency]:EXECute
driver.source.lfOutput.sweep.frequency.execute.set_with_opc()

Immediately starts an LF sweep. [:SOURce<hw>]:LFOutput:SWEep[:FREQuency]:MODE determines which sweep is executed, e.g. SOURce:LFOutput:SWEep:FREQuency:MODE STEP.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.