To
SCPI Command :
[SOURce<HW>]:CORRection:FRESponse:RF:USER:SLISt<CH>:PORTs:TO
- class ToCls[source]
To commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get(index=Index.Default) int [source]
# SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:USER:SLISt<CH>:PORTs:TO value: int = driver.source.correction.fresponse.rf.user.slist.ports.to.get(index = repcap.Index.Default)
Sets the port number from that the signal is coming and the port to that it is going. Available ports depend on the file content and file extenssion, see ‘S-parameters (Touchstone) files’.
- param index
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Slist’)
- return
freq_resp_sli_stfr: integer Range: 1 to 8 (dynamic)
- set(freq_resp_sli_stfr: int, index=Index.Default) None [source]
# SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:USER:SLISt<CH>:PORTs:TO driver.source.correction.fresponse.rf.user.slist.ports.to.set(freq_resp_sli_stfr = 1, index = repcap.Index.Default)
Sets the port number from that the signal is coming and the port to that it is going. Available ports depend on the file content and file extenssion, see ‘S-parameters (Touchstone) files’.
- param freq_resp_sli_stfr
integer Range: 1 to 8 (dynamic)
- param index
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Slist’)