Modulation<Stream>

RepCap Settings

# Range: Nr1 .. Nr16
rc = driver.source.bb.wlnn.fblock.user.modulation.repcap_stream_get()
driver.source.bb.wlnn.fblock.user.modulation.repcap_stream_set(repcap.Stream.Nr1)

SCPI Command :

[SOURce<HW>]:BB:WLNN:FBLock<CH>:[USER<DI>]:MODulation<ST>

class ModulationCls

Modulation commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: Stream, default value after init: Stream.Nr1

get(frameBlock=FrameBlock.Default, userIx=UserIx.Default, stream=Stream.Default) → RsSmbv.enums.WlannFbMod

# SCPI: [SOURce<HW>]:BB:WLNN:FBLock<CH>:[USER<DI>]:MODulation<ST>
value: enums.WlannFbMod = driver.source.bb.wlnn.fblock.user.modulation.get(frameBlock = repcap.FrameBlock.Default, userIx = repcap.UserIx.Default, stream = repcap.Stream.Default)

Selects the modulation used for the spatial stream.

param frameBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fblock’)

param userIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

param stream

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Modulation’)

return

modulation: BPSK| QPSK| QAM16| QAM64| QAM256| QAM1024| QAM4096

set(modulation: RsSmbv.enums.WlannFbMod, frameBlock=FrameBlock.Default, userIx=UserIx.Default, stream=Stream.Default) → None

# SCPI: [SOURce<HW>]:BB:WLNN:FBLock<CH>:[USER<DI>]:MODulation<ST>
driver.source.bb.wlnn.fblock.user.modulation.set(modulation = enums.WlannFbMod.BPSK, frameBlock = repcap.FrameBlock.Default, userIx = repcap.UserIx.Default, stream = repcap.Stream.Default)

Selects the modulation used for the spatial stream.

param modulation

BPSK| QPSK| QAM16| QAM64| QAM256| QAM1024| QAM4096

param frameBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fblock’)

param userIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

param stream

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Modulation’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.wlnn.fblock.user.modulation.clone()