Execute

SCPI Command :

[SOURce<HW>]:BB:TDSCdma:UP:PPARameter:EXECute

class ExecuteCls

Execute commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None

# SCPI: [SOURce<HW>]:BB:TDSCdma:UP:PPARameter:EXECute
driver.source.bb.tdscdma.up.pparameter.execute.set()

Presets the channel table of cell 1 with the parameters defined by the PPARameter commands. Scrambling Code 0 is automatically selected.

set_with_opc(opc_timeout_ms: int = - 1) → None

# SCPI: [SOURce<HW>]:BB:TDSCdma:UP:PPARameter:EXECute
driver.source.bb.tdscdma.up.pparameter.execute.set_with_opc()

Presets the channel table of cell 1 with the parameters defined by the PPARameter commands. Scrambling Code 0 is automatically selected.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.