Scode

SCPI Command :

[SOURce<HW>]:BB:TDSCdma:DOWN:CELL<ST>:SLOT<CH0>:CHANnel<US0>:SCODe

class ScodeCls

Scode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cell=Cell.Default, slotNull=SlotNull.Default, channelNull=ChannelNull.Default) → int

# SCPI: [SOURce<HW>]:BB:TDSCdma:DOWN:CELL<ST>:SLOT<CH0>:CHANnel<US0>:SCODe
value: int = driver.source.bb.tdscdma.down.cell.slot.channel.scode.get(cell = repcap.Cell.Default, slotNull = repcap.SlotNull.Default, channelNull = repcap.ChannelNull.Default)

Sets the spreading code for the selected channel. The code channel is spread with the set spreading code. The range of values of the spreading code depends on the channel type and the spreading factor. Depending on the channel type, the range of values can be limited.

param cell

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cell’)

param slotNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Slot’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

scode: integer Range: 1 to 16

set(scode: int, cell=Cell.Default, slotNull=SlotNull.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:TDSCdma:DOWN:CELL<ST>:SLOT<CH0>:CHANnel<US0>:SCODe
driver.source.bb.tdscdma.down.cell.slot.channel.scode.set(scode = 1, cell = repcap.Cell.Default, slotNull = repcap.SlotNull.Default, channelNull = repcap.ChannelNull.Default)

Sets the spreading code for the selected channel. The code channel is spread with the set spreading code. The range of values of the spreading code depends on the channel type and the spreading factor. Depending on the channel type, the range of values can be limited.

param scode

integer Range: 1 to 16

param cell

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cell’)

param slotNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Slot’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)