CeCovariance

SCPI Commands :

[SOURce<HW>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:CECovariance:PERiod
[SOURce<HW>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:CECovariance:STATe

class CeCovarianceCls[source]

CeCovariance commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_period() → int[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:CECovariance:PERiod
value: int = driver.source.bb.gnss.system.sbas.waas.nmessage.nav.ceCovariance.get_period()

Sets the periodicity of the SBAS message.

return

interval: integer Range: 0 to 999

get_state() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:CECovariance:STATe
value: bool = driver.source.bb.gnss.system.sbas.waas.nmessage.nav.ceCovariance.get_state()

Enables generation of the particular SBAS correction data.

return

state: 1| ON| 0| OFF

set_period(interval: int) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:CECovariance:PERiod
driver.source.bb.gnss.system.sbas.waas.nmessage.nav.ceCovariance.set_period(interval = 1)

Sets the periodicity of the SBAS message.

param interval

integer Range: 0 to 999

set_state(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:WAAS:NMESsage:NAV:CECovariance:STATe
driver.source.bb.gnss.system.sbas.waas.nmessage.nav.ceCovariance.set_state(state = False)

Enables generation of the particular SBAS correction data.

param state

1| ON| 0| OFF