Config

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:GLONass:SDYNamics:CONFig

class ConfigCls[source]

Config commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(satelliteSvid=SatelliteSvid.Default) → RsSmbv.enums.DopplerConfig[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GLONass:SDYNamics:CONFig
value: enums.DopplerConfig = driver.source.bb.gnss.svid.glonass.sdynamics.config.get(satelliteSvid = repcap.SatelliteSvid.Default)

Selects between the predefined velocity profiles or a user-defined one.

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

return

predefined_config: USER| VEL1| VEL2 USER User-defined Profile parametrs are configurable. VEL1 Low dynamics Profile parametrs are read-only. VEL2 High dynamics Profile parametrs are read-only.

set(predefined_config: RsSmbv.enums.DopplerConfig, satelliteSvid=SatelliteSvid.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GLONass:SDYNamics:CONFig
driver.source.bb.gnss.svid.glonass.sdynamics.config.set(predefined_config = enums.DopplerConfig.USER, satelliteSvid = repcap.SatelliteSvid.Default)

Selects between the predefined velocity profiles or a user-defined one.

param predefined_config

USER| VEL1| VEL2 USER User-defined Profile parametrs are configurable. VEL1 Low dynamics Profile parametrs are read-only. VEL2 High dynamics Profile parametrs are read-only.

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)