Aelevation

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:GLONass:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:AELEVation

class AelevationCls[source]

Aelevation commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) → float[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GLONass:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:AELEVation
value: float = driver.source.bb.gnss.svid.glonass.mpath.v.a.echo.aelevation.get(satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)

Sets the angle of arrival elevation.

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

param vehicle

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

param antenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

param echo

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)

return

aoa_elevation: float Range: 0 to 6.28, Unit: rad

set(aoa_elevation: float, satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GLONass:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:AELEVation
driver.source.bb.gnss.svid.glonass.mpath.v.a.echo.aelevation.set(aoa_elevation = 1.0, satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)

Sets the angle of arrival elevation.

param aoa_elevation

float Range: 0 to 6.28, Unit: rad

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

param vehicle

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

param antenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

param echo

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)