Lcod

SCPI Command :

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe
class LcodCls[source]

Lcod commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get_state() bool[source]
# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe
value: bool = driver.source.bb.btooth.econfiguration.pconfiguration.tphys.lcod.get_state()

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

return

tphys: 1| ON| 0| OFF

set_state(tphys: bool) None[source]
# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe
driver.source.bb.btooth.econfiguration.pconfiguration.tphys.lcod.set_state(tphys = False)

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

param tphys

1| ON| 0| OFF