State

SCPI Command :

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:L1M<CH>:STATe
class StateCls[source]

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channel=Channel.Default) bool[source]
# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:L1M<CH>:STATe
value: bool = driver.source.bb.btooth.econfiguration.pconfiguration.rphys.l1M.state.get(channel = repcap.Channel.Default)

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘L1M’)

return

rphys: No help available

set(rphys: bool, channel=Channel.Default) None[source]
# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:L1M<CH>:STATe
driver.source.bb.btooth.econfiguration.pconfiguration.rphys.l1M.state.set(rphys = False, channel = repcap.Channel.Default)

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

param rphys

1| ON| 0| OFF

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘L1M’)