Lcod

SCPI Command :

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:LCOD:STATe
class LcodCls[source]

Lcod commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get_state() → bool[source]
# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:LCOD:STATe
value: bool = driver.source.bb.btooth.econfiguration.pconfiguration.phys.lcod.get_state()

Specifies the physical layers for which the Peripheral has a minimum number of used channels requirement. Information is signaled via LL_MIN_USED_CHANNELS_IND.

INTRO_CMD_HELP: You can enable one or more PHYs:

  • L1M for LE uncoded 1 Msymbol/s PHY.

  • L2M for LE uncoded 2 Msymbol/s PHY.

  • LCOD for LE coded 1 Msymbol/s PHY.

return

state: 1| ON| 0| OFF

set_state(state: bool) → None[source]
# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:LCOD:STATe
driver.source.bb.btooth.econfiguration.pconfiguration.phys.lcod.set_state(state = False)

Specifies the physical layers for which the Peripheral has a minimum number of used channels requirement. Information is signaled via LL_MIN_USED_CHANNELS_IND.

INTRO_CMD_HELP: You can enable one or more PHYs:

  • L1M for LE uncoded 1 Msymbol/s PHY.

  • L2M for LE uncoded 2 Msymbol/s PHY.

  • LCOD for LE coded 1 Msymbol/s PHY.

param state

1| ON| 0| OFF