Power

SCPI Command :

SCONfiguration:EXTernal:DIGital<CH>:RF:POWer

Commands in total: 2

Subgroups: 1

Direct child commands: 1

get(index=Index.Default) → float

# SCONfiguration:EXTernal:DIGital<CH>:RF:POWer
value: float = driver.sconfiguration.external.digital.rf.power.get(index = repcap.Index.Default)

In uncoupled mode, sets the RF level of the external instrument.

Parameters:

index – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Digital’)

Returns:

power: float Range: -130 to 20

set(power: float, index=Index.Default) → None

# SCONfiguration:EXTernal:DIGital<CH>:RF:POWer
driver.sconfiguration.external.digital.rf.power.set(power = 1.0, index = repcap.Index.Default)

In uncoupled mode, sets the RF level of the external instrument.

Parameters:

• power – float Range: -130 to 20

• index – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Digital’)

Cloning the Group

# Create a copy of the original group, that exists independently
power_copy = driver.sconfiguration.external.digital.rf.power.clone()

Subgroups

• Offset