Continuous

SCPI Command :

INITiate<HW>:[POWer]:CONTinuous

class ContinuousCls

Continuous commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channel=Channel.Default) → bool

# SCPI: INITiate<HW>:[POWer]:CONTinuous
value: bool = driver.initiate.power.continuous.get(channel = repcap.Channel.Default)

Switches the local state of the continuous power measurement by R&S NRP power sensors on and off. Switching off local state enhances the measurement performance during remote control. The remote measurement is triggered with method RsSmbv. Read.Power.get_) . This command also returns the measurement results. The local state is not affected, measurement results can be retrieved with local state on or off.

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Initiate’)

return

continuous: 1| ON| 0| OFF

set(continuous: bool, channel=Channel.Default) → None

# SCPI: INITiate<HW>:[POWer]:CONTinuous
driver.initiate.power.continuous.set(continuous = False, channel = repcap.Channel.Default)

Switches the local state of the continuous power measurement by R&S NRP power sensors on and off. Switching off local state enhances the measurement performance during remote control. The remote measurement is triggered with method RsSmbv. Read.Power.get_) . This command also returns the measurement results. The local state is not affected, measurement results can be retrieved with local state on or off.

param continuous

1| ON| 0| OFF

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Initiate’)