from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
from .....Internal import Conversions
from ..... import enums
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class AcquireCls:
"""Acquire commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("acquire", core, parent)
[docs] def set(self, meas_type: enums.CorrectionMeasType) -> None:
"""SCPI: [SENSe]:CORRection:COLLect[:ACQuire] \n
Snippet: driver.sense.correction.collect.acquire.set(meas_type = enums.CorrectionMeasType.OPEN) \n
Initiates a reference measurement (calibration) . The reference measurement is the basis for the measurement
normalization. The result depends on whether a reflection measurement or transmission measurement is performed (see
[SENSe:]CORRection:METHod) . To obtain a correct reference measurement, a complete sweep with synchronization to the end
of the sweep must have been carried out. This is only possible in the single sweep mode. Is only available if External
Generator Control (R&S FSW-B10) is installed and active. \n
:param meas_type: THRough | OPEN THRough 'TRANsmission' mode: calibration with direct connection between generator and device input 'REFLection' mode: calibration with short circuit at the input OPEN only allowed in 'REFLection' mode: calibration with open input
"""
param = Conversions.enum_scalar_to_str(meas_type, enums.CorrectionMeasType)
self._core.io.write(f'SENSe:CORRection:COLLect:ACQuire {param}')