from ...Internal.Core import Core
from ...Internal.CommandsGroup import CommandsGroup
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class PreSelectionCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("preSelection", core, parent)
[docs]
def set(self) -> None:
"""
``CALibration:PRESelection`` \n
Snippet: ``driver.calibration.preSelection.set()`` \n
Due to changes in temperature, the YIG-preselector frequency may become slightly offset. This command re-aligns the
preselector quickly, without requiring a full self-alignment of the FSW. For FSW85 models, the YIG2 filter is also
re-aligned. This command is only available for FSW models 1331.5003Kxx, and only if a YIG-preselector is available.
"""
self._core.io.write(f'CALibration:PRESelection')
[docs]
def set_with_opc(self, opc_timeout_ms: int = -1) -> None:
"""
``CALibration:PRESelection`` \n
Snippet: ``driver.calibration.preSelection.set_with_opc()`` \n
Due to changes in temperature, the YIG-preselector frequency may become slightly offset. This command re-aligns the
preselector quickly, without requiring a full self-alignment of the FSW. For FSW85 models, the YIG2 filter is also
re-aligned. This command is only available for FSW models 1331.5003Kxx, and only if a YIG-preselector is available.
Same as set, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value.
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call.
"""
self._core.io.write_with_opc(f'CALibration:PRESelection', opc_timeout_ms)