from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from .......Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class HoldoffCls:
"""Holdoff commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("holdoff", core, parent)
[docs] def set(self, delay_time: float) -> None:
"""SCPI: [SENSe]:SWEep:EGATe:HOLDoff \n
Snippet: driver.applications.k30NoiseFigure.sense.sweep.egate.holdoff.set(delay_time = 1.0) \n
Defines the delay time between the gate signal and the continuation of the measurement. Note: If you perform gated
measurements in combination with the IF Power trigger, the FSW ignores the holding time for frequency sweep, FFT sweep,
zero span and I/Q mode measurements. \n
:param delay_time: Range: 0 s to 30 s, Unit: S
"""
param = Conversions.decimal_value_to_str(delay_time)
self._core.io.write(f'SENSe:SWEep:EGATe:HOLDoff {param}')
[docs] def get(self) -> float:
"""SCPI: [SENSe]:SWEep:EGATe:HOLDoff \n
Snippet: value: float = driver.applications.k30NoiseFigure.sense.sweep.egate.holdoff.get() \n
Defines the delay time between the gate signal and the continuation of the measurement. Note: If you perform gated
measurements in combination with the IF Power trigger, the FSW ignores the holding time for frequency sweep, FFT sweep,
zero span and I/Q mode measurements. \n
:return: delay_time: Range: 0 s to 30 s, Unit: S"""
response = self._core.io.query_str(f'SENSe:SWEep:EGATe:HOLDoff?')
return Conversions.str_to_float(response)