from ........Internal.Core import Core
from ........Internal.CommandsGroup import CommandsGroup
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class AllCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("all", core, parent)
[docs]
def set(self) -> None:
"""
``CONFigure:DPD:FILE:GENerate:ALL`` \n
Snippet: ``driver.applications.k18AmplifierEt.configure.dpd.file.generate.all.set()`` \n
This command generates the waveform files containing predistortion information within the amplifier application. All in
all, the command generates three waveform files: 'AM/AM' only, 'AM/PM' only and 'AM/AM' plus 'AM/PM'. It also transfers
these waveform files to the connected signal generator and turns on the 'AM/AM' and 'AM/PM' DPDs.
Alternatively, you can do that with: \n
- method ``RsFsw.applications.k18AmplifierEt.configure.dpd.file.generate.set()`` and
- method ``RsFsw.applications.k18AmplifierEt.configure.dpd.amxm.state.set()``
Prerequisites for this command \n
- Turn on polynomial DPD (method ``RsFsw.applications.k18AmplifierEt.configure.ddpd.state.set()`` ) .
"""
self._core.io.write(f'CONFigure:DPD:FILE:GENerate:ALL')
[docs]
def set_with_opc(self, opc_timeout_ms: int = -1) -> None:
"""
``CONFigure:DPD:FILE:GENerate:ALL`` \n
Snippet: ``driver.applications.k18AmplifierEt.configure.dpd.file.generate.all.set_with_opc()`` \n
This command generates the waveform files containing predistortion information within the amplifier application. All in
all, the command generates three waveform files: 'AM/AM' only, 'AM/PM' only and 'AM/AM' plus 'AM/PM'. It also transfers
these waveform files to the connected signal generator and turns on the 'AM/AM' and 'AM/PM' DPDs.
Alternatively, you can do that with: \n
- method ``RsFsw.applications.k18AmplifierEt.configure.dpd.file.generate.set()`` and
- method ``RsFsw.applications.k18AmplifierEt.configure.dpd.amxm.state.set()``
Prerequisites for this command \n
- Turn on polynomial DPD (method ``RsFsw.applications.k18AmplifierEt.configure.ddpd.state.set()`` ) .
Same as set, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value.
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call.
"""
self._core.io.write_with_opc(f'CONFigure:DPD:FILE:GENerate:ALL', opc_timeout_ms)