Gap

SCPI Command :

TRACe:IQ:EGATe:GAP

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get() → float[source]

# TRACe:IQ:EGATe:GAP
value: float = driver.trace.iq.egate.gap.get()

Defines the interval between several gate periods for gated measurements with the I/Q analyzer.

Returns:: samples: numeric value Max = (440 MS * sample rate/200MHz) -1 pretrigger samples defined by TRACe:IQ:SET; sample rate defined by method RsFsw.applications.k10Xlte.trace.iq.symbolRate.get() ) Range: 1…Max (samples)

set(samples: float) → None[source]

# TRACe:IQ:EGATe:GAP
driver.trace.iq.egate.gap.set(samples = 1.0)

Defines the interval between several gate periods for gated measurements with the I/Q analyzer.

Parameters:: samples – numeric value Max = (440 MS * sample rate/200MHz) -1 pretrigger samples defined by TRACe:IQ:SET; sample rate defined by method RsFsw.applications.k10Xlte.trace.iq.symbolRate.get() ) Range: 1…Max (samples)