Band

SCPI Commands :

[SENSe]:MIXer:HARMonic:BAND
[SENSe]:MIXer:HARMonic:BAND:PRESet

Commands in total: 2

Subgroups: 0

Direct child commands: 2

get() → Band

# [SENSe]:MIXer:HARMonic:BAND
value: enums.Band = driver.sense.mixer.harmonic.band.get()

Selects the external mixer band. The query returns the currently selected band. Is only available if the external mixer is active (see method RsFsw.applications.k50Spurious.sense.mixer.state.set() ) .

Returns:

band: KA | Q | U | V | E | W | F | D | G | Y | J | USER Standard waveguide band or user-defined band.

preset() → None

# [SENSe]:MIXer:HARMonic:BAND:PRESet
driver.sense.mixer.harmonic.band.preset()

Restores the preset frequency ranges for the selected standard waveguide band. Note: Changes to the band and mixer settings are maintained even after using the [PRESET] function. Use this command to restore the predefined band ranges.

preset_with_opc(opc_timeout_ms: int = -1) → None

# [SENSe]:MIXer:HARMonic:BAND:PRESet
driver.sense.mixer.harmonic.band.preset_with_opc()

Restores the preset frequency ranges for the selected standard waveguide band. Note: Changes to the band and mixer settings are maintained even after using the [PRESET] function. Use this command to restore the predefined band ranges.

Same as preset, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.

set(band: Band) → None

# [SENSe]:MIXer:HARMonic:BAND
driver.sense.mixer.harmonic.band.set(band = enums.Band.A)

Selects the external mixer band. The query returns the currently selected band. Is only available if the external mixer is active (see method RsFsw.applications.k50Spurious.sense.mixer.state.set() ) .

Parameters:

band – KA | Q | U | V | E | W | F | D | G | Y | J | USER Standard waveguide band or user-defined band.